User Manual (TRK-MPC5634M)Table of Contents1 INTRODUCTION51.1 Overview51.2 Package Contents51.3 Supported Devices51.4 Recommended Materials51.5 Handling Precautions62 HARDWARE FEATURES62.1 TRK-MPC5634M Board Features62.2 On-Board Virtual USB Port82.3 TRK-MPC5634M Jumper/Connector Quick Reference92.4 External Power Supply Requirement133 GETTING STARTED WITH THE TRK-MPC5634M144 SYSTEM SETUP144.1 Overview144.2 Operating System Requirements144.3 Software Setup144.4 Quick Startup154.5 Hardware Setup155 OPERATING MODES165.1 Overview165.2 Debug Mode165.3 Run Mode165.4 External JTAG/Nexus Mode176 JUMPER SETTINGS176.1 System Power176.2 I/O Pins186.3 Debug Mode186.4 CAN Port196.5 Virtual Serial Port196.6 LIN Channels/Connectors206.7 MCU226.8 Boot Configuration236.9 Clock Selection246.10 Push Buttons256.11 LED Display Port266.12 DIL Switch266.13 Analog Input Enable276.14 Photo Sensor Enable286.15 Reset Sources286.16 OSJTAG Bootloader Enable296.17 eTPUA LED Enable297 TRK-MPC5634M CODE DEVELOPMENT SOFTWARE307.1 Using CodeWarrior With The TRK-MPC5634M307.2 Using P&E Software With The TRK-MPC5634M308 TRANSITIONING TO YOUR OWN TARGET308.1 Hardware Solutions At A Glance318.2 Working With P&E’s Multilink Universal or USB Qorivva Multilink328.3 Working With P&E’s Cyclone MAX339 TROUBLESHOOTING349.1 TRK-MPC5634M Is Undetected3410 TRK-MPC5634M ERRATA (REV. A ONLY)35Size: 1.39 MBPages: 37Language: EnglishOpen manual
