Grizzly H8172 User Manuals

Table of Contents

• INTRODUCTION

  2
• Foreword

  2
• Machine Data Sheet

  2
• Contact Info

  2
• SECTION 1: SAFETY

  3
• Safety Instructions for Machinery

  3
• Additional Safety for Cement Mixers

  5
• SECTION 2: CIRCUIT REQUIREMENTS

  6
• 110V Operation

  6
• SECTION 3: SETUP

  7
• Setup Safety

  7
• Unpacking

  7
• Inventory

  8
• Assembly

  9
• Test Run

  11
• SECTION 4: OPERATIONS

  12
• Operation Safety

  12
• Operation Tips

  12
• SECTION 5: MAINTENANCE

  13
• Lubrication

  13
• Cleaning

  13
• Drive Belt

  13
• Wiring Diagram

  14
• Parts Breakdown

  15
• Parts Breakdown

  16
• Safety Labels Breakdown

  17
• WARRANTY AND RETURNS

  18
• Hairpin Cotter Pin (Wheels)

  2
• Hex Bolts M8-1.25 x 65 (Leg to Frame)

  2
• Flat Washers 8mm (Leg to Frame)

  2
• Lock Washers 8mm (Leg to Frame)

  2
• Hex Nuts M8-1.25 (Leg to Frame)

  2
• Hex Bolt M6-1 x 25 (Plunger Rods)

  1
• Qty Lock Nut M6-1 (Plunger Rods)

  1
• A. Lower Drum

  1
• Cotter Pin (Plunger Rod)

  1
• B. Motor Assembly

  1
• Hex Bolts M8-1.25 x 65 (Bracket to Frame)

  2
• C. Tipping Wheel

  1
• Flat Washers 8mm (Bracket to Frame)

  2
• D. Upper Drum

  1
• Lock Washers 8mm (Bracket to Frame)

  2
• E. Support Leg

  1
• Hex Nuts M8-1.25 (Bracket to Frame)

  2
• F. Frame

  1
• G. Axle Bracket

  1
• Flat Washers 8mm (Bearing Block)

  1
• H. Mixing Blades

  2
• Lock Washers 8mm (Bearing Block)

  1
• I. Wheels

  2
• Hex Nuts M8-1.25 (Bearing Block)

  1
• J. Bearing Block

  1
• Hex Bolts M8-1.25 x 20 (Upper Bracket)

  2
• K. Upper Bracket

  1
• Flat Washers 8mm (Upper Bracket)

  2
• L. Gasket (not shown)

  1
• Lock Washers 8mm (Upper Bracket)

  2
• Hex Nuts M8-1.25 (Upper Bracket)

  2
• Plastic Washers 10mm (Blade/Lower)

  2
• Flat Washers 10mm (Blade/Lower)

  2
• C Lock Washers 10mm (Blade/Lower)

  2
• Hex Nuts M10-1.5 (Blade/Lower)

  2
• Hex Bolts M8-1.25 x 20 (Drum Pieces)

  10
• Flat Washers 8mm (Drum Pieces)

  10
• Lock Washers 8mm (Drum Pieces)

  10
• Flat Washers 10mm (Blade/Upper)

  2
• Lock Washers 10mm (Blade/Upper)

  2
• Hex Nuts M10-1.5 (Blade/Upper)

  2
• Hex Bolt M8-1.25 x 65 (Motor Assembly)

  1
• Flat Washers 8mm (Motor Assembly)

  3
• Lock Washers 8mm (Motor Assembly)

  3
• Hex Nuts M8-1.25 (Motor Assembly)

  3
• Hex Bolts M8-1.25 x 20 (Tipping Wheel)

  2
• Flat Washers 8mm (Tipping Wheel)

  2
• Lock Washers 8mm (Tipping Wheel)

  2
• Hex Nuts M8-1.25 (Tipping Wheel)

  2