User ManualTable of ContentsNotice2Warranty2Certifications2WARNING2TM-1400 Series Progressive Scan Shutter Cameras8Operation Manual81 Introduction81.1 Product Description81.2 Features91.3 Functional Options101.4 System Configuration11FIGURE 1. TM-1400 System Configuration11FIGURE 2. TM-1400CL System Configuration112 Installation122.1 Getting Started122.1.1 Unpacking Instructions122.1.2 Components List122.1.3 Accessories and Options122.2 Camera Setup122.2.1 Heat Dissipation122.2.2 Connector Pin Configurations132.2.2 (a) 12-Pin Connector (TM-1400)13FIGURE 3. 12-Pin Connector on Rear Panel of Camera13TABLE 1. 12-Pin Connector (TM-1400)132.2.2 (b) 12-Pin Connector (TM-1400CL)13TABLE 2. 12-Pin Connector (TM-1400CL)132.2.2 (c) Digital Output Connector (TM-1400 only)14FIGURE 4. 31-Pin Digital Connector on Rear Panel of Camera (TM-1400 only)14TABLE 3. 31-Pin Connector (MP211-031-113-4300)142.2.2 (d) Camera Link Connector15TABLE 4. Connector Pinout Configurations (10226-6212 VC)152.2.2 (e) Analog Output Connector152.2.3 Shutter Speed Control Dial (TM-1400 only)16TABLE 5. Shutter Speed Control Dial162.2.4 RS-232 Communication Cable (TM-1400 only)16FIGURE 5. Serial Communication Cable RS-232B-12162.2.5 Digital Output Cable (TM-1400 only)17FIGURE 6. Pinout Configuration for Digital Output Cable172.2.6 Camera Link Cable (CL Versions Only)182.2.7 Power Supplies and Power Cable Setup182.2.7 (a) Power Supplies182.2.7 (b) JAI PULNiX Power Cables19FIGURE 7. 12P-02S Interface Cable (optional)192.2.7 (c) Building Your Own Power Cable192.2.7 (d) Attaching the Power Cable to the Connector191. Rotate the connector while applying slight pressure until the keyways line up.192. Press the connector into place until firmly seated.193. Plug the power cord into the AC socket. This will power the camera up.192.2.8 Attaching the Analog Video Output202.2.9 Attaching the Camera Lens203 Operation213.1 Camera Rear Panel (TM-1400)213.1.1 Up/Down Switch213.1.2 Digital Output Connector213.1.3 Analog Output Connector213.1.4 Power, RS-232, and External Sync Connector213.1.5 Shutter Speed Control Switch213.1.6 Mode Selection Switch21TABLE 6. Mode Selection Switch223.2 Camera Rear Panel (CL Versions)233.2.1 Digital Output Connector233.2.2 Analog Output Connector233.2.3 Power and External Sync Connector233.3 Progressive Scanning233.4 Electronic Shutter243.5 Asynchronous Reset243.5.1 External VINIT With Pulse Width24FIGURE 8. Pulse Width Async Shutter Timing253.5.2 Internal Shutter Speed Control253.6 Dynamic Range Control263.6.1 Programmable Look-Up Table (LUT) and Knee Control263.7 Scan Modes273.7.1 Full Progressive Scan273.7.2 Partial Scan273.8 External Sync273.9 Bayer Color Filter (Color Versions)273.9.1 Color Filter Array283.9.2 Bayer Color Filter Array (CFA)283.9.3 Starting Pixel Configuration293.9.4 Sync and Data293.9.5 Camera Functions303.9.6 Interpolation Software31TABLE 7. Frame Grabber Interpolation Software List313.9.7 Color Interpolation313.10 Camera Timing Charts323.11 Serial Communication Kit CS-232C (not required for “CL” version)384 Troubleshooting394.1 Problems and Solutions394.1.1 Symptom: No Video394.1.2 Symptom: Dark Video394.1.3 Symptom: Non-Synchronized Video394.2 Information and Support Resources405 Appendix415.1 Specifications41TABLE 8. TM-1400 Series Product Specifications Table411/2" progressive scan interline transfer CCD417.60mm (H) x 6.20mm (V)411392 (H) x 1040 (V)414.65µm x 4.65µm411392 x 1040 pixels at 30 Hz/15 Hz41Internal/external auto switch41HD/VD, 4.0 Vp-p impedance 4.7K ohms4115/30Hz±2%, non-interlace41HD= 31.1 kHz±2%4150.00 / 25.00 MHz41Digital: 1392 (H) x 1040 (V)41Analog; over 900 TV lines (H) x 800 TV lines (V)4150dB min. (AGC off)411.0 lux f=1.4 (no shutter) @30fps41Sensitivity: 10µV/ e-41Analog: 714mV, 75 ohms (900 mV white clip)41Digital output: 8-bit RS-644 output41Camera Link (TM-1400CL only)41OFF41Programmable LUT (1.0 std.)41C-mount (use 2/3" format lenses or larger)4112V DC±10%, 370-390 mA (current measured at 25°)417Grms (10Hz to 2000Hz)4170G4144mm x 44mm x 64mm (1.73" x 1.73" x 2.51")41Without tripod mount: 133 g, 4.7 oz. (TM-1400), 138 g, 4.9 oz. (TM-1400CL)41With tripod mount: 144.5 g, 5.1 oz. (TM-1400) 149.5 g, 5.3 oz. (TM-1400CL)41OP 89-3 Differential Input, VINIT42OP 89-4 Differential Input, VD42OP 93 RS-42242OP 93-1 10-bit output42TM-1400: 30DG-02 digital output cable, CS-232E serial communication kit,42TM-1400CL: 26CL-02-26 digital output cable42PD-12UUP series (includes power connector)4212P-02S425.2 Physical Dimensions42FIGURE 9. Physical Dimensions (TM-1400)42FIGURE 10. Physical Dimensions (TM-1400CL)435.3 Spectral Response43FIGURE 11. Spectral Response43Size: 1.06 MBPages: 44Language: EnglishOpen manual