Japan Radio Co Ltd. NTG337-XL0 User Manuals

Table of Contents

• 1. OVERVIEW

  1
• 1.1. FCC Notice

  1
• CERTIFICATION NOTE FROM INDUSTRY CANADA

  1
• System Configuration

  1
• Deployment Schemes

  1
• Components

  1
• 2. Specifications

  2
• General

  2
• External Views of the Units

  2
• AP-RFU (Omni Antenna)

  2
• AP-RFU (Omni Antenna) Nameplate

  2
• AP-RFU (Omni Antenna) Mounting Bracket

  2
• AP-RFU (Sectoral-Horn Antenna)

  2
• AP-RFU (Sectoral-Horn Antenna) Nameplate

  2
• AP-RFU (Sectoral-Horn Antenna) Mounting Bracket

  2
• AP-IFU

  2
• AP-IFU Nameplate

  2
• WT

  2
• WT Nameplate

  2
• WT Mounting Bracket

  2
• WT (External Antenna)

  2
• WT (External Antenna) Nameplate

  2
• WT Adapter

  2
• WT Adapter Nameplate

  2
• WT AC Adapter

  2
• Antenna direction adjustment tool

  2
• AP

  3
• AP-RFU

  3
• Overview

  3
• Antenna section

  3
• RF section

  3
• IF section

  3
• Operations and Indications

  3
• Indications

  3
• Switches

  3
• Terminals

  3
• Omni Antenna

  3
• Sectoral-Horn Antenna

  3
• AP-IFU

  3
• Overview

  3
• IF section

  3
• Operations and Indications

  3
• Indications

  3
• Switches

  3
• Terminals

  3
• WT

  4
• WT

  4
• Overview

  4
• Antenna section

  4
• RF section

  4
• IF section

  4
• Digital section

  4
• Interface section

  4
• Power supply

  4
• Operations and Indications

  4
• Indications

  4
• Switches

  4
• Terminals

  4
• WT

  4
• 4.1.8.3.2. WT Adapter

  4
• CONSTRUCTING A POINT-TO-MULTIPOINT SYSTEM (AP)

  5
• Overview

  5
• Installing the AP-RFU and AP-IFU

  5
• Installing the AP-RFU (Omni Antenna)

  5
• Installing the AP-RFU (Sectoral-Horn Antenna)

  5
• installing the AP-IFU

  5
• Installing the AP-IFU

  5
• Example of Installing the AP-IFU

  5
• Opening and Closing the AP-IFU Cover

  5
• Adjusting the Direction of the AP-RFU

  5
• Adjusting the Direction of the AP-RFU (Omni Antenna)

  5
• Adjusting the Direction of the AP-RFU (Sectoral-Horn Antenna)

  5
• Direction adjustment of the antenna

  5
• Connecting a Cable between AP-RFU and AP-IFU

  5
• AP-RFU (Omni Antenna)

  5
• AP-RFU (Sectoral-Horn Antenna)

  5
• Connecting Cables from the AP-IFU to external

  5
• Connecting the Power cable connector

  5
• The confirmation of AP-IFU

  5
• Waterproofing Connectors

  5
• Self Bonding tape

  5
• Connecting the AP Local Management Tool

  5
• Configure the AP parameters

  5
• AP Local management tool

  5
• Configure the AP network parameters

  5
• Reset the AP

  5
• Measure the cable loss

  5
• Register the AP ID number to OpS

  5
• 5.10. Check sheet of AP Installation

  5
• CONSTRUCTING A POINT-TO-MULTIPOINT SYSTEM (WT)

  6
• 6.1. Overview

  6
• OpS

  6
• Register the WT ID number to AP

  6
• Connecting the WT Local Management Tool

  6
• WT Local management tool

  6
• Configure the WT

  6
• Installing the WT

  6
• Installing the WT

  6
• Example of Installing the WT

  6
• Setting the WT for Vertical or Horizontal Polarization

  6
• Installing the WT (External Antenna)

  6
• Installing the WT (ExternalΦ30cm Antenna)

  6
• Installing the WT (ExternalΦ60cm Antenna)

  6
• Adjusting the Direction of the WT

  6
• Connecting the WT Local Management Tool

  6
• Roughly Adjusting the Direction

  6
• Finely Adjusting the Direction

  6
• The receive level and the distance

  6
• Installing the WT Adapter

  6
• Connecting Cables to the WT

  6
• Waterproofing WT small window

  6
• When you use the cable with the LAP sheath for outdoor

  6
• Waterproofing Without Using a Cold-Shrinkable Tube

  6
• Testing

  6
• Perform a continuity test

  6
• Measure the packet loss rate

  6
• 6.14. Check sheet of WT Construction

  6
• 7. CONSTRUCTING A POINT-TO-POINT SYSTEM

  7
• 7.1. Overview(WT Construction flow)

  7
• Connecting the WT Local Management Tool

  7
• Configure the WT(master)

  7
• Configure the WT(slave)

  7
• Installing the WT

  7
• Installing the WT(master/slave)

  7
• Example of Installing the WT

  7
• Setting the WT for Vertical or Horizontal Polarization

  7
• Installing the WT (External Antenna)

  7
• Installing the WT (ExternalΦ30cm Antenna)

  7
• Installing the WT (ExternalΦ60cm Antenna)

  7
• Adjusting the Direction of the WT

  7
• Adjusting the Direction of the WT

  7
• Connecting the WT Local Management Tool

  7
• Roughly Adjusting the Direction

  7
• Finely Adjusting the Direction

  7
• The receive level and the distance

  7
• Installing the WT Adapter(master/slave)

  7
• Connecting Cables to the WT(master/slave)

  7
• Waterproofing WT small window

  7
• When you use the cable with the LAP sheath for outdoor

  7
• Waterproofing Without Using a Cold-Shrinkable Tube

  7
• Testing

  7
• Ping test

  7
• Measure the packet loss rate (with WT Local mnagement tool)

  7
• Measure the packet loss rate (with OpS)

  7
• 7.14. Check sheet of Point to Point Construction

  7
• 8. Standard Tools to be Used

  8
• 9. INITIAL VALUES

  9
• Point to Multipoint system

  9
• Initial values for AP parameters (Point to Multipoint System)

  9
• Initial values for WT(1 - 239) parameters (Point to Multipoint system)

  9
• Initial values for AP-IFU swiches

  9
• Initial values for WT(Master) parameters (Point to point System)

  9
• Initial values for WT (Slave) parameters (Point to point System)

  9
• System example Point to Multipoint system

  10
• System example Point to Point

  11