User ManualTable of Contents1 Introduction42 Getting Started42.1 Achieving the Best Performance52.2 Safety Instructions52.3 Recycling Kramer Products52.4 Quick Start63 Overview74 Your 910 Digital Audio Preamplifier75 Installing the 910 in a Rack116 Connecting the 910 Digital Audio Preamplifier126.1 Connecting the RS-232 Port136.2 Connecting the ETHERNET Port136.2.1 Connecting the ETHERNET Port Directly to a PC (Crossover Cable)146.2.2 Connecting the ETHERNET Port via a Network Hub (Straight Through Cable)156.2.3 Configuring the Ethernet Port156.3 Connecting via USB176.4 Connecting a Microphone to the XLR Input177 Operating the 910 Digital Audio Preamplifier187.1 Using the Front Panel Buttons187.1.1 Using MIX187.1.2 Using Loudness187.1.3 Using Talkover187.1.4 Using Store187.1.5 Using Recall187.2 Controlling the 910 from the PC207.3 Using the Infrared Remote Controller207.4 Updating the 910 Firmware208 Technical Specifications219 Protocol 3000 Syntax229.1 Host Message Format229.1.1 Simple Command229.1.2 Command String229.2 Device Message Format229.2.1 Device Long Response2210 910 Commands in Protocol 30002310.1 Help Commands2310.2 Device Initiated Messages2310.3 Result and Error Codes110.4 Basic Routing Commands2410.5 Preset Commands2410.6 Audio Parameter Commands2510.7 Identification Commands2610.8 Network Setting Commands2610.9 Machine Information Commands2710.10 Command Terms2710.11 Entering Commands2810.12 Command Forms2810.13 Command Chaining2810.14 Maximum String Length2910.15 Backward Support29Size: 4.76 MBPages: 31Language: EnglishOpen manual