User ManualTable of ContentsMaster Table of Contents8Safety2Section A - Installation9Section B - Operation19Section C - Accessories29Section D - Maintenance33Section E - Theory of Operation35Section F - Troubleshooting and Repair41Symptoms44The Machine is dead - The Input contactor does not operate.44Input contactor (CR1) chatters.44Input contactor pulls in when ON/OFF Switch is closed but immediately drops out.45Machine shuts off (input contactor drops out) when the welder output terminals are made electrically "hot".(Output Terminals Switch ON).45Machine input contactor operates but machine has no weld output with the Output terminal Switch ON. Fan runs and pilot light glows.46The machine does not have maximum weld output46The weld output terminals are always electrically "hot".46Machine has maximum weld output and no control.47Machine has minimum output and no control.47Poor arc starting when the DC600 is in the CV Sub-Arc or CV Innershield Modes.48Poor arc characteristics in all processes.48Section G - Electrical Diagrams91Size: 2.59 MBPages: 97Language: EnglishOpen manual