Maretron TLM100 User Manuals

Table of Contents

• 1 General

  5
  • 1.1 Introduction

    5
  • 1.2 Gasoline Tanks

    5
  • 1.3 Firmware Revision

    5
  • 1.4 Features

    5
  • 1.5 TLM100 Accessories

    6
  • 1.6 Quick Install

    6
• 2 Installation

  6
  • 2.1 Unpacking the Box

    6
  • 2.2 Theory of Operation

    6
  • 2.3 Choosing a Mounting Location

    7
    • 2.3.1 Effect of Pitch and Roll on the TLM100

      8
    • 2.3.2 Use of an Airlock on Black Water Tanks

      8
  • 2.4 Mounting the TLM100

    9
    • 2.4.1 Mounting the TLM100 Sensor Component

      9
      • 2.4.1.1 Installation on a Tank with a SAE J1810 5-Bolt Fitting

        9
      • 2.4.1.2 Installation on a Tank with a SAE J1810 5-Bolt Fitting and Focus Tube

        10
      • 2.4.1.3 Installation on a Tank with a SAE J1810 5-Bolt Fitting and Airlock

        11
      • 2.4.1.4 Installation on a Tank with a 1.25”BSP or 1.5”NPT Threaded Tank Fitting

        11
      • 2.4.1.5 Installation on a Tank with a 1.25”BSP or 1.5”NPT Threaded Tank Fitting and Focus Tube

        12
      • 2.4.1.6 Installation on a Tank with a 1.25”BSP or 1.5”NPT Threaded Tank Fitting and Airlock

        13
    • 2.4.2 Mounting the TLM100 Interface Component

      13
  • 2.5 Connecting the TLM100

    14
    • 2.5.1 Connecting to NMEA 2000® Interface

      14
• 3 Configuring the TLM100

  15
  • 3.1 Configuring Tank Type

    15
  • 3.2 Configuring Tank Number

    15
  • 3.3 Configuring Tank Capacity

    15
  • 3.4 Tank Depth or Custom Calibration

    16
    • 3.4.1 Tank Depth Programming

      16
    • 3.4.2 Custom Calibration

      16
• 4 Maintenance

  16
• 5 Troubleshooting

  16
• 6 Technical Specifications

  18
• 7 Technical Support

  19
• 8 Maretron (2 Year) Limited Warranty

  20