Maxtor quickview 300 User Manuals

Table of Contents

• MAXTOR CORPORATION

  1
• AUDIENCE

  1
• MANUAL ORGANIZATION

  1
• TERMINOLOGY AND CONVENTIONS

  1
• REFERENCES

  1
• PRODUCT OVERVIEW

  2
• KEY FEATURES

  2
• REGULATORY COMPLIANCE STANDARDS

  2
• HARDWARE REQUIREMENTS

  2
• 3.1 SPACE REQUIREMENTS

  3
• 3.2 UNPACKING INSTRUCTIONS

  3
• 3.3 HARDWARE OPTIONS

  3
• 3.3.1 PATA Interface Connector

  3
• 3.3.2 PATA BUS ADAPTER

  3
• 3.4 COMBINATION CONNECTOR (J1)

  3
• 3.4.1 DC Power (J1, Section A)

  3
• 3.4.2 External Drive Activity LED

  3
• 3.4.3 PATA Bus Interface Connector (J1, Section C)

  3
• 3.5 MOUNTING

  3
• 3.5.1 Orientation

  3
• 3.5.2 Clearance

  3
• 3.5.3 Ventilation

  3
• 3.6 FOR SYSTEMS WITH AN PATA ADAPTER BOARD

  3
• 3.6.1 Adapter Board Installation

  3
• 3.6.1.1 Connecting the Adapter Board and the Drive

  3
• 3.7 TECHNIQUES IN DRIVE CONFIGURATION

  3
• 3.7.1 Operating system limitations

  3
• 3.8 SYSTEM STARTUP AND OPERATION

  3
• 4.1 Models and Capacities

  4
• 4.2 Drive Configuration

  4
• 4.4 Physical Dimensions

  4
• 4.5 Power Requirements (80/100/120/160/200GB)

  4
• 4.5.1 Power Requirement (250/300GB)

  4
• 4.5.2 Voltage Tolerance

  4
• 4.6 Power Mode Definitions

  4
• 4.7 EPA Energy Star Compliance

  4
• 4.8 Environmental Limits

  4
• 4.9 Shock and Vibration

  4
• 4.10 Reliability Specifications

  4
• 4.11 EMC/EMI

  4
• 4.11.1 Radiated Electromagnetic Field Emissions - EMC Compliance

  4
• 4.11.2 Canadian Emissions Statement

  4
• 4.12 Safety Regulatory Compliance

  4
• 5.1 INTRODUCTION

  5
• 5.2 MECHANICAL INTERFACE

  5
• 5.2.1 Signal Cable and Connector

  5
• 5.3 ELECTRICAL INTERFACE

  5
• 5.3.1 PATA Bus Interface

  5
• 5.4 REGISTER ADDRESS DECODING

  5
• 5.5 COMMAND INTERFACE

  5
• 5.5.1 General Feature Set

  5
• 5.5.2 Supported Commands

  5
• 6.1 Product Support/Technical Assistance/Customer Service

  6
• Figure 3-1 Mechanical Dimensions of the Quickview 300 Hard Drive

  3
• Figure 3-2 20-Pack Shipping Container

  3
• Figure 3-3 Jumper Locations on the PATA Interface Connector

  3
• Figure 3-4 AT Connector and Jumper Location

  3
• Figure 3-5 J1 DC Power and PATA Bus Combination Connector

  3
• Figure 3-6 Mounting Dimensions for the Quickview 300 Hard Drives

  3
• Figure 3-7 Mounting Screw Clearance for the Quickview 300 Hard Drive

  3
• Figure 3-8 Drive Power Supply and PATA Bus Interface Cables

  3
• Figure 4-1 Basplate Temperature Measurement Location

  4
• AT Jumper Options

  3
• Cylinder Limitation Jumper (CLJ)

  3
• J1 Power Connector, Section A

  3
• Logical Addressing Format

  3
• Supported Commands

  5
• Identify Drive Command Parameters

  5