Measurement Specialties 9116 User Manuals

Table of Contents

• Chapter 1: General Information

  1
• Introduction

  1
• Description of the Instrument

  2
• 1.2.1 Differences Between Models 9016 and 9116

  3
• Options

  5
• 1.3.1 Pressure Ranges

  5
• 1.3.2 Manifolds and Pressure Connections

  5
• 1.3.3 Communication Interfaces

  6
• Chapter 2: Installation and Set Up

  7
• Unpacking and Inspection

  7
• Safety Considerations

  7
• Preparation for Use

  7
• 2.3.1 Environment

  7
• 2.3.2 Power

  8
• 2.3.3 Mounting and Module Dimensions

  9
• 2.3.4 Network Communications Hookup

  9
• 2.3.4.1 Ethernet Host Port Hookup

  9
• 2.3.5 Diagnostic Port Hookup

  13
• 2.3.6 Pressure Connections

  13
• 2.3.6.1 RUN Mode Inputs

  14
• 2.3.6.2 CAL Mode Inputs

  15
• 2.3.6.3 PURGE Mode Inputs

  15
• 2.3.6.4 LEAK Mode Inputs

  16
• 2.3.6.5 Supply Air

  16
• 2.3.7 Case Grounding

  17
• 2.3.8 Trigger Input Signal

  17
• 2.3.9 Power Up Checks and Self-Diagnostics

  17
• Chapter 3: Programming and Operation

  18
• Commands & Responses

  18
• 3.1.1 Introduction

  18
• 3.1.1.1 TCP/UDP/IP Protocols

  18
• 3.1.2 Commands

  19
• 3.1.2.1 General Command Format

  19
• 3.1.2.2 Command Field

  20
• 3.1.2.3 Position Field

  20
• 3.1.2.4 Datum Fields

  21
• 3.1.2.5 Format Field

  21
• Responses

  22
• 3.1.3.1 Interpreting Offset Values (Re-zero Calibration Adjustment)

  23
• 3.1.3.2 Interpreting Gain Values (Span Calibration Adjustment)

  23
• 3.1.3.3 Interpreting Engineering Units Output

  23
• Functional Command Overview

  23
• 3.1.4.1 Startup Initialization

  24
• 3.1.4.2 Module Data Acquisition

  24
• 3.1.4.3 Calibration Adjustment of Offset/Gain Correction Coefficients

  25
• 3.1.4.4 Delivery of Acquired Data to Host

  26
• 3.1.4.5 Network Query and Control Functions

  27
• 3.1.4.6 Other Functions

  27
• Detailed Command Description Reference

  28
• Power Up Clear (Command ‘A’)

  29
• Reset (Command ‘B’)

  30
• Configure/Control Multi-point Calibration (Command ‘C’)

  31
• Sub-command Index 00: Configure & Start Multi-Point Calibration

  32
• Sub-command Index 01: Collect Data for a Calibration Point

  34
• Sub-command Index 02: Calculate & Apply Correction Coefficients

  36
• Sub-command Index 03: Abort Multi-Point Calibration

  38
• Read Tranducer Voltages (Command ‘V’)

  39
• Calculate and Set Gains (Command ‘Z’)

  41
• Read Transducer A/D Counts (Command ‘a’)

  43
• Read High-Speed Data (Command ‘b’)

  45
• Define/Control Autonomous Host Streams (Command ‘c’)

  46
• Sub-command Index 00: Configure a Host Delivery Stream

  48
• Sub-command Index 01: Start Streams(s)

  52
• Sub-command Index 02: Stop Stream(s)

  54
• Sub-command Index 03: Clear Stream(s)

  55
• Sub-command Index 04: Return Stream Information

  56
• Sub-command Index 05: Select Data in a Stream

  58
• Sub-command Index 06: Select Protocol for Stream Delivery

  61
• Calculate and Set Offsets (Command ‘h’)

  63
• Read Temperature Counts (Command ‘m’)

  65
• Read Temperature Voltages (Command ‘n’)

  67
• Read Module Status (Command ‘q’)

  69
• Read High-Precision Data (Command ‘r’)

  72
• Read Transducer Temperature (Command ‘t’)

  74
• Read Internal Coefficients (Command ‘u’)

  76
• Download Internal Coefficients (Command ‘v’)

  80
• Set/Do Operating Options/Functions (Command ‘w’)

  83
• Network Query (UDP/IP Command ‘psi9000’)

  87
• Re-Boot Module (UDP/IP Command ‘psireboot’)

  89
• (UDP/IP Command ‘psirarp’)

  90
• Chapter 4: Calibration

  91
• Introduction

  91
• Re-Zero Calibration

  93
• 4.2.1 Re-Zero Calibration Valve Control

  93
• 4.2.2 Re-Zero Calibration Summary

  94
• Span Calibration

  94
• 4.3.1 Span Calibration Valve Control

  95
• 4.3.2 Span Calibration Summary

  96
• Integrated Multi-Point Calibration Adjustment

  98
• 4.4.1 Multi-Point Calibration Valve Control

  98
• 4.4.2 Multi-Point Calibration Summary

  99
• Coefficient Storage

  100
• Line Pressure Precautions

  101
• Chapter 5: Service

  102
• Maintenance

  102
• 5.1.1 Common Maintenance

  104
• 5.1.2 Module Disassembly

  105
• 5.1.3 Electronic Circuit Board Replacement

  105
• 5.1.3.1 PC-327 Analog Board

  106
• 5.1.3.2 PC-322/323 Main Board/Power PC Daughter Board Assembly

  106
• 5.1.3.3 Remove and Replace PC-323 on PC-322

  108
• 5.1.4 Replacement of Transducers

  109
• 5.1.5 Calibration Valve Solenoid Replacement

  110
• 5.1.6 Replacement of O-Rings

  111
• 5.1.6.1 DH200 Pressure Transducer O-Ring Replacement

  112
• 5.1.6.2 Tubing Plate O-Ring Replacement

  113
• 5.1.6.3 Adapter Plate O-Ring Replacement

  114
• 5.1.6.4 Calibration Manifold Piston O-Ring Replacement

  115
• 5.1.6.5 Solenoid Valve O-Ring Replacement

  116
• Upgrading Module Firmware

  117
• 5.2.1 Upgrading Firmware Via Host TCP/IP Port

  117
• Chapter 6: Troubleshooting Guide

  118
• Ethernet Module Troubleshooting

  118
• 6.1.1 Checking Module Power-Up Sequence

  118
• 6.1.2 Checking Module TCP/IP Communications

  119
• 6.1.2.1 Module IP Address Assignment

  119
• 6.1.2.2 Host IP Address Assignment for Windows® 95/98/2000/XP/NT

  120
• 6.1.2.3 Verifying Host TCP/IP Communications

  121
• Zero and Gain Calibration Troubleshooting

  122
• User Software

  123
• Chapter 7: Start-up Software

  124
• Introduction

  124
• All Commands – Quick Reference

  125
• Model 9116 Response Error Codes

  126
• Cable Diagrams

  127
• 9116 Mounting Dimensions

  129
• Model 9116 Range Codes

  130
• NetScannerAppendix D: 9116 Mounting Dimensions

  132
• Binary Bit Map

  133