User ManualTable of ContentsNighthawk X4 AC2200 WiFi Range Extender1Contents31. Get to Know Your Extender5Front Panel and Side Panel LEDs and Buttons6When to Use Your Extender7Support for the 802.11ac Networking Standard82. Get Started9Use the Extender in Extender Mode10Place the Extender and Apply Power10Connect to an Existing WiFi Network10Use the Extender in Access Point Mode15Access Extender Settings16Run Smart Setup163. Extender Network Settings18View Connected Devices19Boost Your Video Streaming With FastLane Technology19View WiFi Settings21Change the WiFi Network Name21Turn Off the SSID Broadcast to Create a Hidden Network22Disable or Enable the WiFi Radios23Change the WiFi Speed24Use WPS to Add a Computer to the Extender’s WiFi Network25Use WPS With the Push Button Method26Use WPS With the PIN Method26Deny Access to a Computer or WiFi Device27Set Up an Access Schedule29Change the Extender’s Device Name30Set Up the Extender to Use a Static IP Address30Use the Extender With MAC Filtering or Access Control314. Monitor and Maintain the Extender33Change the Extender User Name and Password34Turn Password Protection Off and On35Recover a Forgotten User Name or Password35Automatically Adjust for Daylight Saving Time36Manually Set the Extender Clock36Back Up and Restore the Extender Configuration37Back Up the Configuration Settings37Restore the Configuration Settings38Return the Extender to Its Factory Settings39Use the Factory Reset Button to Restore Factory Settings39Log In to the Extender and Reset to Factory Settings39Update the Firmware40Restart the Extender Remotely415. FAQs and Troubleshooting43FAQs44Cannot Connect to the Extender45Cannot Join a WiFi Network45A. Supplemental Information46Factory Default Settings47Technical Specifications47Size: 1.88 MBPages: 48Language: EnglishOpen manual