Netgear XS708Ev2 – ProSAFE® 10-Gigabit Ethernet Web Managed (Plus) Switch User Manuals

Table of Contents

• ProSAFE 8-Port and 16-Port 10-Gigabit Web Managed Switch Models XS708Ev2 and XS716E

  1
• Contents

  3
• 1. Hardware Setup

  6
  • Package Contents

    7
  • Switch Front Panel

    8
    • XS708Ev2 Front Panel

      8
    • XS716E Front Panel

      8
  • Switch Back Panel

    9
  • Connect Equipment to the XS708Ev2 Switch

    10
  • Connect Equipment to the XS716E Switch

    11
  • Check the Status Using the LEDs

    12
• 2. Getting Started

  13
  • Configure the Switch

    14
  • Access the Switch Using a Web Browser

    14
    • Access a Switch That Is Off-Network

      14
    • Access a Switch That Is Connected to a Network

      15
  • Access the Switch With the ProSAFE Plus Configuration Utility

    15
    • Install the ProSAFE Plus Utility

      15
    • Access the Switch Using the ProSAFE Plus Utility

      16
  • Change the Password

    17
    • Use Browser-Based Access to Change the Password

      17
    • Use the ProSAFE Plus Utility to Change the Password

      18
• 3. Network Settings

  19
  • Specify IP Address Settings for the Switch

    20
    • Use Browser-Based Access to Specify the Switch IP Address

      20
    • Use the ProSAFE Plus Utility to Specify the Switch IP Address

      21
  • Manage Multicast Traffic With IGMP Snooping

    22
    • Use Browser-Based Access to Customize IGMP Snooping

      22
    • Use the ProSAFE Plus Utility to Customize IGMP Snooping

      23
    • Use Browser-Based Access to Specify a VLAN for IGMP Snooping

      24
    • Use the ProSAFE Plus Utility to Specify a VLAN for IGMP Snooping

      25
  • Set Up Static Link Aggregation Groups

    26
    • Use Browser-Based Access to Specify LAG Membership and Enable LAGs

      27
    • Use the ProSAFE Plus Utility Specify LAG Membership and Enable LAGs

      28
• 4. Optimize Performance With Quality of Service

  30
  • Enable 802.1p/DSCP-Based Quality of Service

    31
    • Use Browser-Based Access to Enable 802.1p/DSCP-Based QoS

      31
    • Use the ProSAFE Plus Utility to Enable 802.1p/DSCP-Based QoS

      32
  • Configure Port-Based Quality of Service

    32
    • Use Browser-Based Access to Configure Port-Based QoS

      33
    • Use the ProSAFE Plus Utility to Configure Port-Based QoS

      34
  • Set Up Rate Limiting

    35
    • Use Browser-Based Access to Set Up Rate Limiting

      35
    • Use the ProSAFE Plus Utility to Set Up Rate Limiting

      36
  • Set Up Broadcast Filtering

    38
    • Use Browser-Based Access to Set Up Broadcast Filtering

      38
    • Use the ProSAFE Plus Utility to Set Up Broadcast Filtering

      39
• 5. Use VLANS for Traffic Segmentation

  41
  • VLAN Overview

    42
  • Create Basic Port-Based VLANs

    42
    • Use Browser-Based Access to Create Basic Port-Based VLANs

      42
    • Use the ProSAFE Plus Utility to Create Basic Port-Based VLANs

      43
  • Assign Ports to Multiple Port-Based VLANs

    45
    • Use Browser-Based Access to Assign Ports to Multiple Port-Based VLANs

      45
    • Use the ProSAFE Plus Utility to Assign Ports to Multiple Port-Based VLANs

      46
  • Create 802.1Q-Based VLANs in a Basic Configuration

    48
    • Use Browser-Based Access to Create 802.1Q-Based VLANs in a Basic Configuration

      48
    • Use the ProSAFE Plus Utility to Create 802.1Q-Based VLANs in a Basic Configuration

      49
  • Create 802.1Q-Based VLANs in an Advanced Configuration

    50
    • Use Browser-Based Access to Create 802.1Q-Based VLANs in an Advanced Configuration

      51
    • Use the ProSAFE Plus Utility to Create 802.1Q-Based VLANs in an Advanced Configuration

      52
  • Add Tagged or Untagged Ports to an 802.1Q-Based VLAN

    53
    • Use Browser-Based Access to Add Tagged or Untagged Ports to an 802.1Q-Based VLAN

      54
    • Use the ProSAFE Plus Utility to Add Tagged or Untagged Ports to an 802.1Q-Based VLAN

      55
  • Specify a Port PVID for an 802.1Q-Based VLAN

    56
    • Use Browser-Based Access to Assign a PVID to Ports

      56
    • Use the ProSAFE Plus Utility to Assign a PVID to Ports

      57
• 6. Manage and Monitor the Switch

  59
  • Manage Flow Control

    60
    • Use Browser-Based Access to Manage Flow Control

      60
    • Use the ProSAFE Plus Utility to Manage Flow Control

      61
  • Manage the Port Speed

    62
    • Use Browser-Based Access to Specify the Port Speed or Shut Down a Port

      62
    • Use the ProSAFE Plus Utility to Specify the Port Speed or Shut Down a Port

      63
  • Enable Loop Detection

    64
    • Use Browser-Based Access to Enable Loop Detection

      64
    • Use the ProSAFE Plus Utility to Enable Loop Detection

      65
  • Manage Energy Efficient Ethernet and Other Power Saving Options

    65
  • Upgrade the Firmware

    67
    • Use a Web Browser to Upgrade the Firmware

      67
    • Use the ProSAFE Plus Utility to Upgrade the Firmware

      68
  • Reboot the Switch

    69
    • Use Browser-Based Access to Reboot the Switch

      69
    • Use the ProSAFE Plus Utility to Reboot the Switch

      69
  • Save the Switch Configuration

    70
    • Use Browser-Based Access to Save the Switch Configuration

      70
    • Use the ProSAFE Plus Utility to Save the Switch Configuration

      71
  • Restore a Saved Switch Configuration

    71
    • Use Browser-Based Access to Restore a Saved Switch Configuration

      71
    • Use the ProSAFE Plus Utility to Restore a Saved Switch Configuration

      72
  • Restore Factory Default Settings

    73
    • Use Browser-Based Access to Restore Factory Settings

      73
    • Use the ProSAFE Plus Utility to Restore Factory Settings

      73
  • Enable Port Mirroring

    74
    • Use Browser-Based Access to Enable Port Mirroring

      74
    • Use the ProSAFE Plus Utility to Enable Port Mirroring

      75
  • View Switch Information

    76
    • Use Browser-Based Access to View Switch Information

      76
    • Use the ProSAFE Plus Utility to View Switch Information

      77
  • View the Port Statistics

    78
    • Use Browser-Based Access to View and Clear the Port Statistics

      78
    • Use the ProSAFE Plus Utility to View and Clear the Port Statistics

      79
• 7. Diagnostics and Troubleshooting

  81
  • Use Browser-Based Access to Register Your Product

    82
  • Test Cable Connections

    82
    • Use Browser-Based Access to Test a Cable Connection

      83
    • Use the ProSAFE Plus Utility to Test a Cable Connection

      83
  • Resolve a Subnet Conflict to Access the Switch

    84
• A. Supplemental Information

  85
  • Factory Default Settings

    86
  • Technical Specifications

    87