User ManualTable of ContentsIntroduction181.1 SMART-MR10 Features181.2 SMART-MR10 Models20Installation and Setup212.1 Additional Equipment Required212.2 Additional Features and Information28Operation323.1 Communications with the Receiver323.2 Getting Started333.3 Transmitting and Receiving Corrections353.4 GL1DE®423.5 ALIGN®423.6 Emulated Radar (ER)423.7 Recommended Configuration43PC Utilities444.1 CDU/Convert Installation444.2 CDU454.3 Convert504.4 Firmware Upgrades53Bluetooth® Configuration595.1 Enable Bluetooth on the SMART-MR10 Receiver595.2 Set Up a PC/Laptop with a Bluetooth Adaptor605.3 Locate a Bluetooth-Enabled SMART-MR10 in Range605.4 Communicate with the SMART-MR10 Using Bluetooth615.5 Stop Communicating with SMART-MR10 Using Bluetooth63Technical Specifications64A.1 SMART-MR10 Receiver Performance64A.2 SMART-MR10 Specifications65Commands73B.1 Syntax Conventions73B.2 BTCONTROL Enable/Disable Bluetooth74B.3 COM Configure COM Port75B.4 FRESET Clear Selected Data from NVM and Reset78B.5 LOG Request Logs from the Receiver79B.6 PDPFILTER Enable, disable or reset the PDP filter84B.7 PDPMODE Select the PDP mode and dynamics85B.8 RADARCFG Configure the ER output86B.9 RESET Performs a hardware reset88B.10 SBASCONTROL Set SBAS test mode and PRN89Logs91C.1 Position Logs91C.2 Other Logs93Replacement Parts98D.1 SMART-MR1098D.2 Accessories98Size: 1.92 MBPages: 104Language: EnglishOpen manual