Polycom DOC2553A User Manuals

Table of Contents

• Installation Quick Start Guide for RMX 2000

  1
• Basic Setup

  1
  • MPM/MPM+ Cards & LEDs

    1
  • LAN 2 Connection

    1
• Modifying the USB Key Settings

  1
  • 1 Insert the USB Key provided with your system into the PC workstation and double- click LanConfigUtility.exe to start the utility.

    1
  • 2 Modify the parameters in the utility’s dialog box using the information supplied by your network administrator.

    1
    • 3 Click OK.

      1
    • 4 Remove the USB Key from the PC.

      1
• First-time Power-up and Connection to MCU

  1
  • 1 Insert the USB Key containing the modified IP addresses in the USB port on the RMX’s back panel.

    1
  • 2 Power the RMX ON.

    1
  • 3 Remove the USB key.

    1
  • 6 .

    1
• Modifying the Default IP Service

  2
  • 6 In the IP Network Service creation confirmation, click OK.

    2
  • 8 Click Save & Close.

    2
  • 9 In the Success Message box confirming successful configuration, click OK.

    2
  • 10 In the Reset Confirmation dialog box, click Yes.

    2
  • 11 In the Please wait for system reset message box, click OK. System restart may take up to five minutes.

    2
  • 12 Refresh the browser periodically until the Login screen is displayed and Login. In the Main Screen an MCU State indicator displays the time remaining until the system start-up is complete.

    2
  • 13 Create a new User with Administrator permissions and delete the default User (POLYCOM). For system security reasons, only when this step is completed and if there are no System Errors, the system is fully configured and the green RDY LED on the CN...

    2
• Connecting to a Conference Directly or via Entry Queue (EQ)

  2
  • H.323 Participants

    2
  • SIP Participants

    2
  • ISDN and PSTN Participants

    2
• Conference Control Using DTMF Codes

  2
• RMX™ 2000

  1
• RMX™ 2000

  2