Proxim Wireless Corporation S58-04 User Manuals

Table of Contents

• HOW TO USE THIS MANUAL

  1
• MANUAL ORGANIZATION

  1
• ICONS

  1
• PRODUCT DESCRIPTION

  2
• GENERAL DESCRIPTION

  2
• SPECIFICATIONS

  2
• Transmitter

  2
• Antenna / Antenna Coupling Unit

  2
• Receiver

  2
• System (Single Hop Performance)

  2
• Digital Line Interface

  2
• Auxiliary Connections

  2
• Temperature and Environment

  2
• Power

  2
• Regulatory Information

  2
• 2.2.10 Mechanical

  2
• FRONT PANEL DESCRIPTION

  2
• General

  2
• Test Points / Power Indicator

  2
• Alarm and Status Indicators

  2
• Controls

  2
• Connections

  2
• REAR PANEL DESCRIPTION

  2
• RF Connection

  2
• DATA Connections

  2
• Auxiliary Data Connections

  2
• Switches

  2
• INSTALLATION ACCESSORIES

  2
• INSTALLATION & ADJUSTMENTS

  3
• SHIPPING CONTAINER

  3
• PACKING ITEMS IDENTIFICATION

  3
• BEFORE INSTALLATION TASK LIST

  3
• Site Selection Requirements

  3
• Line-of-Sight and Path Clearance Guidelines

  3
• RSL Calculation and Link Budget

  3
• Fade Margin Calculation

  3
• Availability Calculation

  3
• Frequency Plan Determination

  3
• Power Supply Planning

  3
• Antenna Planning

  3
• TOOLS REQUIRED

  3
• FREQUENCY CHANNEL PLANS

  3
• MOUNTING THE LYNX.SC

  3
• POWER CONNECTION AND W IRING

  3
• DC Power Wiring

  3
• AC Power Connection

  3
• ANTENNA CONNECTION

  3
• TRANSMISSION LINE CONNECTION

  3
• 3.10 ANTENNA INSTALLATION & ALIGNMENT

  3
• 3.11 CEPT-1 (E1) INTERFACECONNECTION

  3
• 3.12 DIP SWITCH SETTINGS

  3
• 3.12.1 Channel Selection

  3
• 3.12.2 Loopback Test Signal Selection

  3
• 3.12.3 Spreading Code Selection

  3
• 3.12.4 Input Alarm (Data Loss) Enable/Disable

  3
• 3.12.5 AIS Enable/Disable

  3
• 3.13 SYSTEM TURN-UP TO SERVICE

  3
• 3.13.1 Output Power Adjustment

  3
• 3.13.2 Loopback/BER Testing

  3
• 3.13.3 Error LED Mode Selection

  3
• 3.14 ADDITIONAL CONNECTIONS

  3
• 3.14.1 Orderwire Connection and Address Selection

  3
• 3.14.2 Alarm Connections

  3
• 3.14.3 Diagnostics Port Operation

  3
• 3.14.3.1 Diagnostics Port using RS-232

  3
• 3.14.3.2 Diagnostics Port using RS-422

  3
• 3.14.3.3 TBOS Protocol and Map

  3
• 3.14.4 AUX DATA (Digital Service Channel) Connection

  3
• 3.14.5 Protect Port Connection (Preliminary Information)

  3
• 3.14.6 Protect Port Connection (Preliminary Information)

  3
• TROUBLESHOOTING

  4
• REGULAR MAINTENANCE

  4
• CHANGING FREQUENCY PLANS

  4
• USING A SPARE TERMINAL

  4
• TECHNICAL SUPPORT

  4
• REPAIR POLICY

  4
• FRONT PANEL STATUS LEDS

  4
• DATA LOSS Alarms

  4
• BER (Bit Error Rate) Alarm

  4
• RX SYNC (Receiver Synchronization) Alarm

  4
• AIS OUT (Alarm Indication Signal)

  4
• FAN Alarm

  4
• RADIO FAIL Alarm

  4
• FAR END Alarm

  4
• ERRORS IN THE DATA STREAM

  4
• INTERFERENCE COUNTERMEASURES

  4
• Use of a Spectrum Analyzer to Evaluate Potential Interference

  4
• BACK-TO-BACK TESTING

  4
• 4.10 BER (BIT ERROR RATE) TESTING

  4
• APPENDICES

  5
• APPENDIX A - DIGITAL LINE INTERFACE SPECIFICATIONS

  5
• 1. General Characteristics

  5
• 2. Specifications at the output ports

  5
• APPENDIX B - REAR PANEL DIP SWITCHES

  5
• APPENDIX C - REAR PANEL DATA CONNECTORS

  5
• FIGURE 2-1: FRONT PANEL, 2.4 GHZ & 5.8 GHZ 1XE1

  2
• FIGURE 2-2: FRONT PANEL, 2.4 GHZ & 5.8 GHZ 2XE1

  2
• FIGURE 2-3: FRONT PANEL, 2.4 GHZ & 5.8 GHZ GHZ 4XE1

  2
• FIGURE 2-4: REAR PANEL, 1XE1

  2
• FIGURE 2-5: REAR PANEL, 2XE1

  2
• FIGURE 2-6: REAR PANEL, 4XE1

  2
• FIGURE 2-7: CEPT-1 INTERFACE GROUNDING SWITCH

  2
• FIGURE 3-1: CHANNEL PLAN, 2.4 GHZ 1XE1

  3
• FIGURE 3-2: CUSTOM CHANNEL PLAN, 2.4 GHZ E1

  3
• FIGURE 3-3: CHANNEL PLAN, 2.4 GHZ 2XE1

  3
• FIGURE 3-4: CHANNEL PLAN, 5.8 GHZ 1XE1

  3
• FIGURE 3-5: CHANNEL PLAN, 5.8 GHZ 2XE1

  3
• FIGURE 3-6: CHANNEL PLAN, 5.8 GHZ 4XE1

  3
• FIGURE 3-7: NEGATIVE VOLTAGE DC CONNECTION

  3
• FIGURE 3-8: POSITIVE VOLTAGE DC CONNECTION

  3
• FIGURE 3-9: AC CONNECTION

  3
• FIGURE 3-10: TYPICAL RSL VOLTAGE VERSUS RECEIVED SIGNAL LEVEL (RSL)

  3
• FIGURE 3-11: CEPT-1 INTERFACE GROUNDING SWITCH

  3
• FIGURE 3-12: LOOPBACK MODE SELECTION

  3
• FIGURE 3-13: SPREADING CODE SELECTION

  3
• FIGURE 3-14: INPUT ALARM DISABLE SWITCH

  3
• FIGURE 3-15: AIS SWITCH

  3
• FIGURE 3-16: TYPICAL RF OUTPUT POWER VERSUS PWR VOLTAGE, 2.4 GHZ MODELS

  3
• FIGURE 3-17: TYPICAL RF OUTPUT POWER VERSUS PWR VOLTAGE, 5.8 GHZ MODELS

  3
• FIGURE 3-18: ERROR LED MODE SELECTION

  3
• FIGURE 3-19: RJ-11 ORDERWIRE TELEPHONE CONNECTION

  3
• FIGURE 3-20: VF PORT CONNECTION

  3
• FIGURE 3-21: PIN CONNECTIONS, ALARM INTERFACE

  3
• FIGURE 3-22: DIAGNOSTIC PORT PROTOCOL SELECTION

  3
• FIGURE 3-23: RS-232 DIAGNOSTIC PORT CONNECTIONS

  3
• FIGURE 3-24: RS-422 DIAGNOSTIC PORT CONNECTIONS

  3
• FIGURE 3-25: REPEATER AND HUB TBOS RADIO NETWORK MANAGEMENT

  3
• FIGURE 3-26: REPEATER APPLICATION WITH SITE NETWORK MANAGEMENT

  3
• FIGURE 3-27: AUX DATA CABLE CONNECTION FOR REPEATER/HUB

  3
• FIGURE 3-28: AUX DATA SELECTION

  3
• FIGURE 3-29: MHS CONFIGURATION

  3
• FIGURE 3-30: SD CONFIGURATION

  3
• FIGURE 4-1: BACK-TO-BACK TEST CONFIGURATION

  4
• FIGURE 4-2: END-TO-END BER TEST CONFIGURATION

  4
• FIGURE A-1: MASK OF THE E1 PULSE (CEPT-1)

  5
• FIGURE C-1: VF PORT CONNECTION

  5
• FIGURE C-2: ALARM PORT CONNECTIONS

  5
• FIGURE C-3: DIAGNOSTIC PORT 9-PIN D-STYLE CONNECTOR

  5
• FIGURE C-4: AUX DATA PORT 9-PIN D-STYLE CONNECTOR

  5
• TABLE 3-A: DC POWER CONNECTION FOR NEGATIVE SUPPLY

  3
• TABLE 3-B: DC POWER CONNECTION FOR NEGATIVE SUPPLY

  3
• TABLE 3-C: TRANSMITTER OUTPUT POWER ADJUSTMENT, +6 DBW EIRP INSTALLATIONS

  3
• TABLE 3-D: TRANSMITTER OUTPUT POWER ADJUSTMENT FOR 2.4 GHZ, USA INSTALLATIONS

  3
• TABLE 3-E: ALARM INTERFACE CONNECTIONS

  3
• TABLE 3-F: TBOS MAP FOR THE LYNX.SC E1S

  3
• TABLE A-2: CEPT-1 INTERCONNECTION SPECIFICATION

  5
• TABLE B-1: LYNX.SC 2.4 GHZ 1XE1, 2XE1 & 4XE1 SWITCH SETTINGS

  5
• TABLE B-2: LYNX.SC 2.4 GHZ 2XE1 SWITCH SETTINGS

  5
• TABLE B-3: LYNX.SC 5.8 GHZ 1XE1 SWITCH SETTINGS

  5
• TABLE B-4: LYNX.SC 5.8 GHZ 2XE1 SWITCH SETTINGS

  5
• TABLE B-5: LYNX.SC 5.8 GHZ 4XE1 SWITCH SETTINGS

  5
• AC

  3
• Accessories

  2
• Alarm connections

  3
• Alarm interface

  3
• Alignment, antenna

  3
• Antenna connection

  3
• Antenna installation

  3
• Antenna planning

  3
• Availability calculation

  3
• Balanced E1

  2
• Bit error rate

  3
• BNC

  3
• Calculations

  3
• Caution

  1
• Coaxial cable

  3
• Code

  3
• Coding

  2
• Container

  3
• Controls

  2
• CSU/DSU

  3
• Data loss

  3
• DIP switch settings

  3
• DIP switches

  2
• EIRP

  3
• Environment

  2
• Error LED

  3
• Errors

  4
• Fade margin

  3
• Fans

  4
• Frequency plan

  3
• Fresnel

  3
• Front panel

  2
• Grounding

  3
• Icons

  1
• Interference

  4
• Line-of-sight

  3
• Link budget

  3
• Mechanical

  2
• MHS

  3
• Mounting

  3
• Note

  1
• Path

  3
• Path planning

  3
• Power connection

  3
• Power connection, AC

  3
• Power connection, DC

  3
• Power supply planning

  3
• Receiver

  2
• REN

  3
• Repair

  4
• RF filter

  3
• RSL

  3
• SD Configuration

  3
• Spares

  4
• Spreading code

  3
• Switches

  4
• Synchronization

  4
• Technical support

  4
• Telephone

  3
• Tips

  1
• Tools

  3
• Transmission line

  3
• Troubleshooting

  4
• Turn-up

  3