User Guide
Table of Contents
- • Do not damage, break or make any modifications to the power cord. Do not place heavy objects on...6
- • Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might oc...6
- • Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becom...6
- • Make sure the wall outlet is near the machine and freely accessible so that in event of an emer...6
- • Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of...6
- • Do not take apart or attempt any modifications to this machine. There is a risk of fire, electr...6
- • To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or scre...6
- • Some parts of the machine are at a high voltage and could give you an electric shock. Also, if ...6
- • If the machine looks damaged or breaks down, smoke is coming out, there is a strange smell or a...6
- • Do not put any metal objects or containers holding water (e.g. vases, flowerpots, glasses) on t...6
- • Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open ...6
- • When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causin...7
- • When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causin...7
- • When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causin...7
- • Unplug the power cord from the wall outlet before you move the equipment. While moving the equi...7
- • Do not place the machine on an unstable or tilted surface. If it topples over, it could cause i...7
- • After you move the machine, fix it with the caster fixture. Otherwise, the machine might move o...7
- • Do not reuse stapled paper. Do not use aluminum foil, carbon-containing paper or other conducti...7
- • For environmental reasons, do not dispose of the equipment or expended supply waste at househol...7
- • The inside of the machine could be very hot. Do not touch the parts with a label indicating the...7
- • This machine has been tested for safety using this supplier's parts and consumables. We recomme...7
- • Our products are engineered to meet high standards of quality and functionality, and we recomme...7
- 10
- 13
- 13
- 13
- 15
- 15
- 15
- 15
- 15
- 15
- 16
- 16
- 16
- 16
- 16
- 16
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- 20
- A If the paper was left out of its package for 5 minutes or more, remove the first 1000mm (39.3")...20
- 22
- 34
- 37
- 51
- 83
- 86
- 86
- 86
- • The area around the ventilation hole may feel warm. This is caused by exhaust air and is not a ...86
- • Do not turn off the main switch while copying. Before turning off the main switch, make sure th...86
- • The machine might fail to produce good copy images if there is condensation inside caused by a ...86
- • The supplier shall not be liable for any loss or damage resulting from a failure of the machine...86
- • Center your paper on the copy table using the size marks. Then slide the paper straight into th...86
- • When copying to a long sheet of paper, lightly hold the sheet as the copier pulls it in so that...86
- • If you open the unit, make sure you close it within 5 minutes to keep light from damaging the c...86
- • When copying to sheets 35" ¥45" (90 cm ¥115 cm) or larger, make sure the paper does not drag di...86
- 91
- 91
- 91
- 91
- 91
- 91
- 91
- 91
- 91
- 93
- 93
- 93
- 93
- 94
- 95
- 95
- 96
- 96
- 96
- 96
- 96
- 96
- 96
- 96
- 96
- 96
- 96
- 96
- 96
- 96
- 96
- 97
- 97
- 97
- 97
- 97