User Manual
Table of Contents
- 11
- 13
- 15
- 21
- 4. Remove the rear transition card from its antistatic envelope and place it on an ESD mat (if av...29
- 6. Lift up the card, and keeping it perfectly vertical, carefully slide the card in the selected ...30
- 9. Using a No. 0 Phillips screwdriver, tighten the captive screws inside the card’s top and botto...33
- 5. Remove the card from its antistatic envelope and place it on an ESD mat (if available) near th...34
- 7. Lift up the card, and keeping it perfectly vertical, carefully slide the card into the selecte...36
- 10. Locate the hot-swap LED on the front card to determine if the card has been activated and is ...37
- 5. Remove the adapter from its antistatic envelope and place it on an ESD mat (if available) near...48
- 7. Lift up the adapter, and keeping it perfectly vertical, carefully slide the adapter into the s...49
- 10. Locate the hot-swap LED on the adapter to determine if the adapter has been activated and is ...51
- 15. Using a No. 0 Phillips screwdriver, tighten the captive screws inside the adapter’s top and b...53
- 69
- 75
- 93
- 97
- 103
- 103
- 103
- 103
- 103
- 103
- 103
- 104
- 104
- 104
- 104
- 104
- 104
- 105
- 105
- 105
- 105
- 106
- 106