User Manual (CSE-932S2-R760B)Table of ContentsOverview1Shipping List1Part Numbers1Where to get Replacement Components1Contacting SuperMicro1ESD Safety Guidelines1General Safety Guidelines1An Important Note to Users1Overview2Warnings and Precautions2Preparing for Setup2Electrical Safety Precautions2General Safety Precautions2System Safety22-1 Front Connectors and Jumpers2Front Connectors2Front Connector and Pin Definitions2Front Jumper Locations and Pin Definitions2Overview3Control Panel Buttons3Control Panel LEDs3Drive Carrier LEDs3SAS Drives3SCSI Drives3Single and Dual Port Expanders3Failover3Single Host Bus Adapter3Single Host Bus Adapter Failover3Dual Host Bus Adapter3Cables and Chassis Power Card3Supported Cascading Configurations3Overview4Installation Steps:4Installation Step 1: Remove the Chassis Cover4To remove the chassis cover4Installation Step 2: Install Hard Drives4To remove hard drive trays from the chassis4To install a hard drive to the hard drive tray4Installation Step 3: Installing the Motherboard4I/O Shield4To install the I/O shield:4Permanent and Optional Standoffs4To install the motherboard:4Add-on Card/Expansion Slot Setup4To install add-on and expansion cards4Installation Step 5: Installing the Air Shroud4To install the air shroud4To check the server's air flow4Installation Complete4System Fans4Replacing a system fan4Power Supply4To change the power supply4To change the power distributor4Overview5Unpacking the System5Preparing for Setup5Choosing a Setup Location5Rack Precautions5General Server Precautions5Rack Mounting Considerations5Ambient Operating Temperature5Reduced Airflow5Mechanical Loading5Circuit Overloading5Reliable Ground5Rack Mounting Instructions5Identifying the Sections of the Rack Rails5Inner Rail Extension5To install the inner rails5To install the outer rails to the rack5To install the chassis into a rack:5Size: 13.9 MBPages: 84Language: EnglishOpen manual