Servis-Rhino 1900 Manual De Usuario
ASSEMBLY
1900 07/10
Assembly Section 3-5
© 2010 Alamo Group Inc.
ASSEMBL
Y
ATTACHMENT TO TRACTOR
•
Reverse tractor squarely up to the machine.
•
Connect the tractors draft links - selecting the
rear most hole in the machines lower link
brackets that allow the machine to be mounted
without contacting the tractor.
rear most hole in the machines lower link
brackets that allow the machine to be mounted
without contacting the tractor.
•
Ensure that the same hole is used on both
sides.
sides.
•
If necessary fit the spacers supplied (as
required) to minimise sideways movement of
the tractor draft links within the hitch brackets.
required) to minimise sideways movement of
the tractor draft links within the hitch brackets.
•
Tighten tractor’s stabilizers.
•
The lifting equipment may now be removed.
•
Fit the stabilizer nose into the tractors top link
position. Use the highest position available
avoiding any load sensing properties.
position. Use the highest position available
avoiding any load sensing properties.
•
The bolt-on nose of the stabilizer is reversible to
accommodate a variety of tractor linkage
designs. (Optional stablizer nose available).
accommodate a variety of tractor linkage
designs. (Optional stablizer nose available).
•
Stretch out the stabilizer and rest the bottom
legs on the lower rail.
legs on the lower rail.
•
Do not fit stabilizer lower pins at this stage.