KRAM 2G. Drive & Talk Radio Mute 68279 Prospecto

Los códigos de productos
68279
Descargar
Página de 2
Drive & Talk 
Product Description 
Drive & Talk Cable 68279 for 
Toyota Land Cruiser 200 / V8 
 
Drive  &  Talk enables the use of the car speakers for phone con-
versation. 
 
Speaker-function: This is achieved by using the mutebox-relays 
to  disconnect  the  rear  speaker  and  connect  the  front  speakers 
to the carkit. This way the radio sound is muted and the sound 
from the carkit is sent through the cars front speakers. You will 
achieve  a  perfect  hands-free  sound  without  interference  from 
the car radio. 
 
For a complete cableset two item numbers are needed. The 1st 
item  number  includes  the  mutebox  and  the  car-specific  cable-
set.  The  2nd  item  number  is  a  carkit-specific  adaptor-cable  for 
adapting the car-specific cable to the carkit. 
 
Power supply of the carkit: All car-specific cablesets have an in-
tegrated  carkit-powersupply.  In  the  car-specific  cableset  the 
constant 12v and the ground wire are connected to the 6 way 
connector. This connector is to be fitted to the 6 way connector 
on  the  carkit  adaptor.  This  way  powersupply,  of  the  carkit,  is 
achieved without cutting the cars wiringloom.  
 
Mute function: The mutewire is connected from the carkit to the 
mutebox through the carkit adaptor. The mutewire is also con-
nected to the radios mute input. This enables the use of the ra-
dios  built  in  mute  function.  If  the  radios  mute  input  pin  is  un-
known  the  mute  wire  can  be  found  in  a  yellow  flywire  fitted 
with  a  bullit  connector.  Please  note  that  not  all  radios  are 
equipped with a mute function.
 
The professional mute 
Drive & Talk 
The professional mute 
Made in Denmark by 
Kram Telecom A/S 
Connector configurations 
RR -  RF -  LF - 
LR - 
RR +  RF +  LF +  LR + 
   - 
SP +   SP - 
LR -  LF - 
RF -  RR - 
LR +  LF +  RF +  RR + 
Technical Specifications
 
 
Voltage supply range :  
10-16 VDC 
Current usage :   
 
<5 uA (passive) / 40 mA (active) 
 
Activation voltage
 
 
Active :  
 
 
< +6VDC 
 
Passive :    
 
> +8VDC   
Maximum output pr. speaker:   30 Watt RMS / 
 
 
 
 
 
50 Watt music power  @ 4 Ohm 
 
 
 
 
 
(3 Amp relays) 
Maximum current supplied by Mutewire:   
 
 
 
 
 
 
 
10 mA. Active when grounded. 
Size:   
 
 
 
75 x 40 x 22 mm 
EN279