Star Trac S-TBTX Manual De Usuario

Remove the top cover from the shipping carton. Remove all parts and shipping supports (except the base) from the carton, and 
verify that the following parts are included in your shipment: 

 

Base   

1 

Display 

1 

Upper Body Arms 

2 

End Caps 

2 

Bolt, Allen Head, __________ 

4 

Bolt, Hex Head, __________ 

8 

Screw, Phillips Head, ___________ 

8 

Flat Washer, ___________ 

4 

Lock Washer, ___________ 

8 

 

 

Your STAR TRAC S-TBTx TOTAL BODY TRAINER can be assembled using the following tools: 

n 

Metric Hex Key Wrenches 

n 

Metric Open-End Wrenches 

n 

Metric Ratchet Socket Wrench Set  

n 

Torque Wrench 

n 

Channel Lock Pliers 

n 

Vice Grip Pliers 

n 

Rubber Mallet 

n 

Phillips Head Screwdriver 

Your STAR TRAC S-TBTx TOTAL BODY TRAINER includes a hex key set and combination open-end wrench. 

 

Cut the long edge of the shipping carton base at both ends. Fold 
the flap down to make a ramp. 

 

With the aid of a helper, lift the rear end of the base, and roll the 

base off of the shipping carton platform. Place the base on the floor 
in the location where the unit will be used. Be sure the chosen 

location is level. 

 

 

 

 

Have your helper hold the display close the neck on the base. Plug 

the display power and I/O cables from the base into the mating 

display connectors. 

Once display power and I/O cables are connected, route the coaxial 

cable up the full length of the display neck before seating the 

display unit on the base.