Dimension One Spas 2003 Manual De Usuario
Aquatic Fitness System
2003 Owner’s Manual
Light Button
Light Button: Push the LIGHT button once to activate the brightest
setting. A second push will activate the medium setting, and a third
push will activate the dimmest setting. Push the LIGHT button a fourth
time to turn the light off. When the spa light is ON, the Light Indicator
Button will be lit. The light will automatically turn off after one hour. A
Light Icon will also display in the upper left corner of the LED Digital
Display Window whenever the light is on.
When the Light Indicator Light, the Jets Indicator Light, and the Heat
Indicator Light are flashing, they indicate a problem with your spa. See
the
setting. A second push will activate the medium setting, and a third
push will activate the dimmest setting. Push the LIGHT button a fourth
time to turn the light off. When the spa light is ON, the Light Indicator
Button will be lit. The light will automatically turn off after one hour. A
Light Icon will also display in the upper left corner of the LED Digital
Display Window whenever the light is on.
When the Light Indicator Light, the Jets Indicator Light, and the Heat
Indicator Light are flashing, they indicate a problem with your spa. See
the
for more details.
The spa in the AquaFit™Dual Temp is designed to allow the installation of an optional
Dynamic L.E.D. Light so that you can enjoy a wide range of lighting sequences. If the
Dynamic L.E.D. Light is installed in your spa, the Light Button is used to turn the
Dynamic L.E.D. Light ON or OFF and manage the custom lighting sequences.
Dynamic L.E.D. Light so that you can enjoy a wide range of lighting sequences. If the
Dynamic L.E.D. Light is installed in your spa, the Light Button is used to turn the
Dynamic L.E.D. Light ON or OFF and manage the custom lighting sequences.
Up and Down Buttons
Up (+) and Down (-) Buttons: Pushing the UP (+) Button increases
the temperature and pushing the DOWN (-) Button decreases the
temperature. Push the respective button one time for each degree of
temperature change you want, or “push and hold” the button for rapid
adjustment.
The actual spa water temperature is normally displayed in the LED
Digital Display Window until you push the UP (+) or DOWN (-)
Button or the Program Button. If you push the UP (+) Button or the
DOWN (-) Button the LED Digital Display Window will change to
indicate your target temperature setting. The LED Digital Display
Window will also display the SET TEMPERATURE Icon in the lower
right side of the Window to indicate the temperature shown in the
window is a target setting and not the actual temperature. The
Temperature Icon will also be displayed along the top of the window if
your new setting requires more heat.
Once the new temperature is set, the actual spa water temperature
will again be indicated. The spa will heat to the new temperature
automatically.
the temperature and pushing the DOWN (-) Button decreases the
temperature. Push the respective button one time for each degree of
temperature change you want, or “push and hold” the button for rapid
adjustment.
The actual spa water temperature is normally displayed in the LED
Digital Display Window until you push the UP (+) or DOWN (-)
Button or the Program Button. If you push the UP (+) Button or the
DOWN (-) Button the LED Digital Display Window will change to
indicate your target temperature setting. The LED Digital Display
Window will also display the SET TEMPERATURE Icon in the lower
right side of the Window to indicate the temperature shown in the
window is a target setting and not the actual temperature. The
Temperature Icon will also be displayed along the top of the window if
your new setting requires more heat.
Once the new temperature is set, the actual spa water temperature
will again be indicated. The spa will heat to the new temperature
automatically.
20