Precor S3.23 Manual De Usuario
S3.23 Assembly and Maintenance Guide
page 17
1
2
3
4
5
6
4
Adjustments and
Maintenance
Maintenance
Adjustments and Maintenance
When the S3.23 is completely assembled, you need to
check the cables for proper tension. Obvious signs that
cable problems exist include:
check the cables for proper tension. Obvious signs that
cable problems exist include:
✔ Top Cap Weight does not rest squarely on the top
weight of the Weight Stack.
✔ Cable rubs the inside edges of the pulleys.
✔ Excess slack exists in the cable.
✔ Weight Pin cannot be easily inserted in or
✔ Excess slack exists in the cable.
✔ Weight Pin cannot be easily inserted in or
removed from each hole in the Weight Stack.
✔ Selector Stem rubs inside the Weight Stack.
CAUTION: Take the time to perform the following
steps. If the cables do not have the proper tension
you could void the Precor Limited Warranty.
steps. If the cables do not have the proper tension
you could void the Precor Limited Warranty.
Important: To access cables and the Selector Stem,
you will need to remove the Shrouds.
you will need to remove the Shrouds.
Top Cap Weight
Weight pin
A slack cable
Pulley
Weight Stack
Holes in Weight Stack