Precor 5.31 Manual De Usuario
Owner’s Manual: Advanced Programming and Troubleshooting
54
21.When you no longer need the information in the error log,
press QUICKSTART for at least four seconds to erase it.
The message, NO ERRORS, appears on the display and
remains static to let you know when the error log has
been cleared.
The message, NO ERRORS, appears on the display and
remains static to let you know when the error log has
been cleared.
Important: You cannot retrieve the error log once you
have cleared it. You may want to resolve any issues you
are experiencing with the EFX before clearing the error
log.
have cleared it. You may want to resolve any issues you
are experiencing with the EFX before clearing the error
log.
22.When you are ready, press OK to cycle back to the
ODOMETER, or press RESET to return to the Precor
banner.
banner.
Troubleshooting Error Codes
If any error codes appear in the center display, turn the unit
Off and On. If the error continues to occur, call an authorized
service person for assistance. Refer to Obtaining Service.
Off and On. If the error continues to occur, call an authorized
service person for assistance. Refer to Obtaining Service.
If ERROR 30 appears on the display, you have an incorrect
RJ45 cable connection. Remove the cable and re-insert it
into the other receptacle on the back of the display console.
The correct receptacle has the tab opening at its base.
RJ45 cable connection. Remove the cable and re-insert it
into the other receptacle on the back of the display console.
The correct receptacle has the tab opening at its base.
For example:
Tab location