Precor CW34864-101 Manual De Usuario

Descargar
Página de 45
Experience Strength™ C-Line Owner’s Manual: Daily Inspection
8
Inspect Cables and End Connections
CAUTION: Carefully inspect the cables, pulleys, fasteners, and related 
hardware regularly. Replace any cable at the first sign of wear using only 
Precor-supplied replacement parts. With regular use, a cable can become 
worn and might fail. Sudden failure of a worn cable can cause severe injury to 
a user. Refer to 
Obtaining Service 
to purchase replacement parts.
Inspect the cables and end connections each day, and replace if damaged. 
Check for kinks, frayed wires, deterioration of the cable coating, and broken 
thimbles. Look for signs of wear particularly at crimped ends of the cable 
and near pulleys.
Important: Cables must be replaced immediately if they are damaged to avoid 
possible injury to users.
Some obvious signs of cable damage are as follows:
Figure 2: Signs of cable damage
In addition to inspecting the cables and end connections for damage, check 
the following:
• Make sure that each cable is properly adjusted and tightened at the top of 
the weight stack.
• Check cable pulleys, end connections, and end fittings. Make sure all 
connections are tight, adjusting cable tension as necessary. 
• Make sure that the cable bolt is threaded a minimum of ten threads into 
the selector stem, and the locking jam nut is tight. (Refer to the following 
figure.)
Exposed inner wire, stretching or cuts in the coating, or broken 
coating in the area that passes over a pulley
A zigzag or wavy pattern
Kinks, which may indicate internal damage
A necked-down cover
A “ballooned” cover