Precor CW34870-101 Manual De Usuario

 

The stability foot is located centrally underneath the weight stack 
frame and should rest evenly on the floor. If the foot is not resting 
firmly on the floor, perform the following procedure. 

Note: Adjustments to the stability foot must be completed before the 
shroud is attached. 

1.  Loosen the stability foot bolts using a 1” open-end or box wrench 

and a 

⁹₁₆” socket wrench.   

2.  Pull the stability foot downward so that it rests firmly on the floor. 

3.  Tighten the stability foot bolts using tools from step one.   

Important: Once all foot adjustments are complete, gently rock the 
machine. If there is any movement, readjust the stability foot.