Pfaff 489 Manual De Usuario
Input
31
6
.01.03
Seam program input with the "Creating/adjusting a program" function
With this function the seam program is entered by sewing a sample. A new program is al-
ways created, i.e. if an existing program is selected, this will be overwritten.
Switch on the machine.
●
Call up the input mode.
●
Call up the "teach-in" function.
●
Carry out the basic settings and conclude with the "Enter" function, see Chapter
●
6.01.01
Basic settings for seam program input.
Before sewing starts the following displays and functions appear on the screen.
Enter the seam start functions, see Chapter
●
6.01.04
Entering the functions at the be-
ginning of the seam during seam programming.
Enter the fullness, see Chapter
●
4.02 Inputting fullness.
Enter the maximum speed for the current seam section.
●
Sew the fi rst seam section using the pedal function.
●
The number of stitches in the current seam section is counted and shown on the display.
After sewing starts, the following displays and functions are shown on the screen.