Roland CD-2e Manual De Usuario

Descargar
Página de 132
 
42
 
Recording an Electronic Instrument
 
Here’s how to connect an electronic instrument such as a digital piano or keyboard, and 
record your performance.
 
4
 
Connect the CD-2e’s LINE IN jacks to your electronic instrument (digital 
piano, keyboard, etc.).
 
Use audio cables to connect the CD-2e’s LINE IN jacks to the output jacks of your 
electronic musical instrument.
 
fig.connect-piano-e.eps
 
5
 
Turn the [LINE] knob to adjust the input level at the LINE IN jacks.
 
Adjust the loudness of the sound you’re recording. Since you’re not using the mic input, 
set the [MIC LEVEL] switch to the “MANUAL” position, and then turn the [MIC] knob all 
the way to the left (off).
While producing the sound that you will actually be recording, turn the [LINE] knob to 
adjust the input level.
Adjust the level so that the peak indicator located above the [LINE] knob lights briefly at 
the loudest moments of the performance you’ll be recording.
 
fig.rec-line-e.eps
 
If you’re recording to an SD 
memory card
If you’re recording to a 
CD-R/RW disc
 
1
 
Turn on the power. 
 
(
 
 
 
1
 
Turn on the power. 
 
(
 
 
 
2
 
Insert the SD memory card.
 
(
 
 
 
2
 
Insert the CD. 
 
(
 
 
 
3
 
Set the audio source to “SD.”
 
Press the [SD CARD] button so it’s lit.
 
fig.selectCD-e.eps
 
3
 
Set the audio source to “CD.”
 
Press the [CD] button so it’s lit.
 
fig.selectSD-e.eps
CD-2e: RCA phono type
Electronic musical instrument: RCA phono type or phone type
Types of plugs that can be connected
* Refer to the owner’s manual of your electronic musical instrument for the appropriate type of plug to use.
R
L
To the output jacks of your 
electronic musical instrument
Louder
Quieter
At this position
Peak indicator
The level meter will move according 
to the level of the audio input.
CD-2e_e.book 42 ページ 2007年9月10日 月曜日 午後8時57分