Roland CD-2e Manual De Usuario

Descargar
Página de 132
 
60
 
Listening to a CD/ Listening to an SD Memory Card
 
* In order to play a CD, you’ll need to use the dedicated AC adaptor, which was included with the CD-2e.
 
 
4
 
Press the [
(Play)] button to start playback.
 
5
 
Turn the [VOLUME] knob to adjust the volume.
Listening to a CD
Listening to an SD memory card
 
1
 
Turn on the power.
 
1
 
Turn on the power.
 
2
 
Insert the CD.
 
2
 
Insert the SD memory card.
 
3
 
Set the audio source to “CD.”
 
Press the [CD] button so it’s lit.
 
fig.selectCD-e.eps
 
3
 
Set the audio source to “SD.”
 
Press the [SD CARD] button so it’s lit.
 
fig.selectSD-e.eps
 
To do this
Perform this action
 
Stop playback
Press the [
(Stop)] button.
 
If you press this button while stopped, you will return to the first track.
 
Pause playback
Press the [
(Play)] button.
 
Press it once again to resume playback from the point at which you 
paused.
 
Go to the beginning 
of a track (Skip)
Press the [
] button.
 
Each time you press this button, you go back by one track. If you press 
this button during playback, you will return to the beginning of the 
track that was playing.
 
Press the [
] button.
 
Each time you press this button, you advance to the next track.
 
Skip between songs at 
high-speed
While stopped, press and hold the [
] or [
] button.
Rewind/
fast-forward (Search)
During playback, press and hold.
 
[
] button: Rewind.
[
] button: Fast-forward.
 
High-speed rewind/
fast-forward
While paused, press and hold the [
] or [
] button.
Currently playing 
track number
Source name
Elapsed playback time
Louder
Softer
If you don’t need the mic or line input, you should 
turn down the input level to the minimum position.
Mic input Set the [MIC LEVEL] switch to the 
“MANUAL” position, and turn the [MIC] knob all the 
way to the left (off).
Line input Turn the [LINE] knob all the way to the 
left (off).
CD-2e_e.book 60 ページ 2007年9月10日 月曜日 午後8時57分