Samsung SCX-6545N Series Manual De Usuario

Getting Started

•

: Enter a new IP address for your machine.

•

: Enter a new Subnet Mask for your machine.

•

: Enter ta new Gateway for your machine.

Click Apply, and then click OK. The machine will automatically print the 
Network Configuration Report

. Confirm that all the settings are 

correct.

Click Exit to close the SetIP program.

If necessary, restart the computer’s firewall.

Press Machine Setup on the control panel.

Press Machine Status > the Machine Info tab > Print/Report.

Press System Report.

Scroll down the list on the right and select Network Configuration 
Report

.

Press Print.

For using SetIP program, disable the computer firewall before continuing by 

performing the following:

Open System Preferences.

Click Security.

Click the Firewall menu.

Turn firewall off.

Connect your machine and the computer using network cable.

Insert the driver CD-ROM, and open the disk window. Open the 
MAC_Installer

 > MAC_Printer > SetIP > SetIPapplet.html.

Double click the file and Safari will automatically open, then select 
Trust

. The browser will open the SetIPapplet.html page that shows the 

printer’s name and IP address information. 

Highlight the printer information row and select the Setup icon, which is 

the second icon from the left in the application menu bar. A TCP/IP 

Configuration window will open.

Enter the printer’s new information into the configuration window as 

follows. In a corporate intranet, you may need to have this information 

assigned by a network manager before proceeding.
•

: Find the machine’s MAC address from the Network 

Configuration Report and enter it without the colons. For example, 

00:15:99:29:51:A8 becomes 0015992951A8.

•

: Enter a new IP address for your machine.

•

: Enter a new Subnet Mask for your machine.

•

: Enter ta new Gateway for your machine.

Select Apply, then OK, and OK again. The printer will automatically 

print the configuration report. Confirm that all the settings are correct. 

Quit Safari. You may close and eject the installation CD-ROM. If 

necessary, restart the computer’s firewall. You have successfully 

changed the IP address, subnet mask, and gateway.

SetIP program should be automatically installed during the printer driver 

installation.

Print the machine’s network configuration report to find your machine’s 

MAC address. (See "Printing out the machine’s MAC address" on 

Open the /opt/Samsung/mfp/share/utils/.

Double click the SetIPApplet.html file. 

Click to open the TCP/IP configuration window. 

Enter the network card’s MAC address, IP address, subnet mask, 

default gateway, and then click Apply. 

The machine prints the network information. Confirm all the settings are 

correct. 

Close the SetIP program. 

You can enter alphabet characters, numbers, or special symbols using the 

keyboard on the touch screen. This keyboard is specially arranged like a 

normal keyboard for better usability for the user. 

Touch the input area where you need to enter characters and the keyboard 

pops up on the screen. The keyboard below is the default showing the 

lowercase letters. 

You can only use IPv4 setting for SetIP.

The following instructions may vary for your model.

If the printer was not shown in the information row, select the Manual 
Setting

 icon (third from left) to open the TCP/IP Configuration window.

MAC address is a hardware serial number of the machine’s 

network interface and can be found in the Network Configuration 
Report

. (See "Printing out the machine’s MAC address" on 

You can only use IPv4 setting for SetIP.

When you enter the MAC address, enter it without a colon(:).

Moves the cursor between characters in the input 

area.

Deletes the character on the left side of the 

cursor.

Deletes the character on the right side of the 

cursor.

Deletes all characters in the input area.

Enters letters within this line.

Toggles between lowercase keys and uppercase 

keys or vice versa.

Switches from the alphanumeric keyboard to the 

symbol keyboard.

Enters a blank between characters.