Samsung SCX-6545N Series Manual De Usuario

Faxing (Optional)

You can store fax numbers conveniently from the networked computer 

using SyncThru™ Web Service.

Open the web browser in your computer.

Enter IP address of your machine, then SyncThru™ Web Service 

shows.
(Example. http://123.123.123.123)

Press Address Book > Individual.

Press Add.

Enter Name, Speed No., and Fax Number.

Press Apply.

Open the web browser in your computer.

Enter IP address of your machine, then SyncThru™ Web Service 

shows.
(Example. http://123.123.123.123)

Press Address Book > Group.

Press Add Group.

Enter Group Name and Speed No..

Add individual ddresses to the fax group. 

Press Apply.

Polling is used when one fax machine requests another to send a 

document. This is useful when the person with the original document is not 

in the office. The person who wants to receive the document, calls the 

machine holding where the original is stored and requests that the 

document be sent. In other words, it "polls" the machine holding that has the 

original.

The polling process is as follows:
1.

Sender stores the originals in the machine. (See "Storing the originals 

Sender gives the Passcode to the receiver.

Receiver dials the fax number and enters the Passcode when 

requested. (See "Polling a remote fax" on page 67.)

Receiver presses Start to receive the stored fax. 

Press Fax from the Main screen.

Place the originals face up in the DADF. Or you can use the scanner 

glass with a single original document, face down.

Adjust the document settings in the Image tab and the Basic tab.

Press the Advanced tab > Polling > Store.

Press the input area then the pop up keyboard, enter Passcode (The 

four-digit number which you have to inform the receiver). If you do not 

want to set Passcode, enter number 0000 here. Then you can store, 

delete, print and receive a fax for polling without any passcode.

Select the Delete On Poll option. If you select Off, the sent fax data will 

be remained in the machine’s memory even after it’s printing. If you 

select On, the fax data will be deleted at the printing point.

Press OK to start to store the originals into memory for polling.

Give the Passcode to the receiver.

Press Fax from the Main screen.

Press the Advanced tab > Polling > Print (or Delete).

Enter Passcode 

Press OK.

This option allows you to retrieve (poll) a fax which is stored in the remote 

machine. 
1.

Press Fax from the Main screen.

Press the Advanced tab > Polling > Poll from Remote.

Enter Passcode and Destination Fax No using the number keypad on 

the control panel. You have to be informed Passcode from sender with 

the remote fax machine.

Press OK.

 numbers can be imported from an *.csv file. 

To use this feature, both the sender and receiver must have the polling 

feature.

If you want to use the Mailbox, refer to Storing the originals in the 
Mailbox

Your can use Delay Poll From Remote to poll the fax at a specific 

time within 24 hours.