Lyngdorf Audio SDAI 2175 Manual De Usuario
- 16 -
Parameter
Value
Note
S/N ratio
113dB
A-wgt. Ref. 200W/8ohms.
Channel separation
84dB
1kHz, 200W/8ohms.
Peak output current
±40A
Output common mode voltage 35V DC
Ref. Ground. The amplifier can
not be used in bridged mono
mode.
not be used in bridged mono
mode.
Output DC voltage
±5 mV
All audio measurements, except frequency response, are measured with a 20 kHz low-
pass filter in accordance with AES-17.
pass filter in accordance with AES-17.
Protection
Parameter
Value
Note
Grounding
Mains earth, chassis and audio
ground are connected
internally.
ground are connected
internally.
Output short circuit current
±40A
Output DC voltage
±5V @ <0.1Hz
Over temperature
All heat sinks and mains-
transformer.
transformer.
Auto resetting thermal fuse in
mains transformer.
mains transformer.
Mains
Parameter
Value
Note
Mains input connector
IEC 320 cold type
Mains lead supplied.
Mains voltage range
100-120V AC, 50–60Hz
115V version
Mains voltage range
200-240V AC, 50-60Hz
230V version
Internal mains fuse
8 Amp
115V version
Internal mains fuse
4 Amp
230V version
Power consumption
1.5 W
STANDBY mode.
Power consumption
35 W
OPERATE mode, no output.
Power consumption
116 W
2*37.5W/4ohms.
Power consumption
820 W
2*300W/4ohms.
Trigger
Parameter
Value
Note
TRIGGER OUT connector
3.5mm (1/8") mono jack
Case=Gnd, Tip=Input
TRIGGER OUT Voltage
12V DC
Short circuit protected
Mechanical
Parameter
Value
Note
Width
450mm (17.72")
Depth
340mm (13.39")
Excluding loudspeaker
connectors.
connectors.
Depth
361mm (14.21")
Including loudspeaker
connectors.
connectors.
Height
88.8mm (3.5")
Excluding feet.
Height
100.6mm (3.96")
Including feet.
Net weight
15.5Kg (34lb.)