Pelco C2223M Manual De Usuario
C2223M (1/06)
3
Installation
The following parts are supplied:
1
Adapter plate with locking screw
1
Pendant wall mount
2
8-32 x 0.75-inch screws
To install the SPM4-W pendant mount:
1.
Run 24 VAC power, video (coax or UTP), and camera control wiring to the mounting location. If
using coax video, attach a female BNC connector to the coax cable. Refer to Figure 6, Table D,
Table E, and Table F in the installation manual for the Spectra Mini dome for wiring information.
using coax video, attach a female BNC connector to the coax cable. Refer to Figure 6, Table D,
Table E, and Table F in the installation manual for the Spectra Mini dome for wiring information.
Figure 1.
Wiring
COAX
VIDEO
CAMERA
CONTROL
POWER
24 VAC
UTP
VIDEO