Cisco Systems ISA550 Manual De Usuario

Configuring the Basic Settings

Cisco ISA500 Series Integrated Security Appliances Administration Guide

208

 

Use the Client Status page to view information for all client stations that are 
already connected to each SSID. The MAC address and IP address for all 
connected client stations for each SSID are displayed. To open this page, click 
Wireless > Wireless Status > Client Status. This page is automatically updated 
every 10 seconds. Click Refresh to manually refresh the data. 

Use the Basic Settings page to change the wireless mode to suit the devices in 
your network, specify the wireless channel and bandwidth for operation to resolve 
issues with interference from other access points in the area, or enable U-APSD 
and SSID Isolation if needed. 

Click Wireless > Basic Settings.

Enter the following information: 

•

Wireless Radio: Click On to turn wireless radio on and hence enable the 
SSID called “cisco-data,” or click Off to turn wireless radio off. Enabling any 
SSID will turn on wireless radio. Disabling all SSIDs will turn off wireless 
radio. 

•

Wireless Mode: Choose the 802.11 modulation technique. 

-

802.11b/g mixed: Choose this mode if some devices in the wireless 
network use 802.11b and others use 802.11g. Both 802.11b and 802.11g 
clients can connect to the access point. 

-

802.11b/g/n mixed: Choose this mode to allow 802.11b, 802.11g, and 
802.11n clients operating in the 2.4 GHz frequency to connect to the 
access point.

-

802.11n only: Choose this mode if all devices in the wireless network 
can support 802.11n. Only 802.11n clients operating in the 2.4 GHz 
frequency can connect to the access point. 

•

Wireless Channel: Choose a channel from a list of channels or choose Auto 
to let the system determine the optimal channel to use based on the 
environmental noise levels for the available channels.