Cisco Systems ISA550 Manual De Usuario
Getting Started
Performing Basic Configuration Tasks
Cisco ISA500 Series Integrated Security Appliances Administration Guide
32
1
green. Release the button and wait for the unit to reboot. The POWER/SYS
light will flash green when the system is rebooting.
light will flash green when the system is rebooting.
•
Or launch the Configuration Utility and login. Click Device Management >
Reboot/Reset in the left hand navigation pane. In the Reset Device area,
click Reset to Factory Defaults.
Reboot/Reset in the left hand navigation pane. In the Reset Device area,
click Reset to Factory Defaults.
After a restore to factory defaults, the following settings apply:
Performing Basic Configuration Tasks
We recommend that you complete the following tasks before you configure the
security appliance:
security appliance:
•
•
•
Changing the Default Administrator Password
The default administrator account (“cisco”) has full privilege to set the
configuration and read the system status. For security purposes, you must change
the default administrator password at the first login.
configuration and read the system status. For security purposes, you must change
the default administrator password at the first login.
STEP 1
Enter the following information:
•
User name: Enter the current username or enter a new username if you want
to change the default username.
to change the default username.
Parameter
Default Value
Username
cisco
Password
cisco
LAN IP
192.168.75.1
DHCP Range
192.168.75.100 to 200