Cisco Systems ISA550 Manual De Usuario
Device Management
Rebooting and Resetting the Device
Cisco ISA500 Series Integrated Security Appliances Administration Guide
448
10
Rebooting and Resetting the Device
Use the Reboot/Reset page to reboot the security appliance or restore the
security appliance to the factory default settings (if necessary) from the
Configuration Utility. Refer to the following topics:
security appliance to the factory default settings (if necessary) from the
Configuration Utility. Refer to the following topics:
•
•
Restoring the Factory Default Settings
To restore the security appliance to the factory default settings, you can press and
hold the RESET button on the back panel for more than 3 seconds, or perform the
Reset to Factory Defaults operation from the Configuration Utility.
hold the RESET button on the back panel for more than 3 seconds, or perform the
Reset to Factory Defaults operation from the Configuration Utility.
!
CAUTION
The Reset To Factory Defaults operation will wipe out the current settings used on
the security appliance (including the imported certificates). We recommend that
you back up your current settings before restoring the factory default settings.
the security appliance (including the imported certificates). We recommend that
you back up your current settings before restoring the factory default settings.
STEP 1
Click Device Management > Reboot/Reset.
The Reboot/Reset window opens.
STEP 2
In the Reset Device area, click Reset to Factory Defaults.
A warning message appears saying “Preparing to restore the factory default
settings. Do you want to continue? WARNING: The current configuration will be
overwritten.”
settings. Do you want to continue? WARNING: The current configuration will be
overwritten.”
STEP 3
Click Yes to reboot the security appliance with the factory default settings.