Patton electronic 49040 Manual De Usuario

Bootloader

SmartNode 4940 User Manual 

 

172.16.1.99(if-ip)[WAN]#reload

 

Running configuration has been changed.

 

Do you want to copy the 'running-config' to the 'startup-config'?

 

Press 'yes' to store, 'no' to drop changes : no

 

Press 'yes' to restart, 'no' to cancel : yes

 

The system is going down

The bootloader ensures that basic operations, network access, and downloads are possible in case of interrupted 
or corrupted application image downloads. It offers console access to the Bootloader and the capability for 
downloading application images (e.g. SmartWare) via the serial link of the console.

To start the Bootloader, power on the SmartNode while pressing the reset button.  Open a Telnet session to 
the SmartNode via one of the Ethernet interfaces, or open a CLI session via the console port (if available on the 
SmartNode).  The login display will appear.  Using the credentials admin / patton , log in to the SmartNode. 
The following prompt will be displayed:

RedBoot>

Type help to display an overview of the available commands. 

The following procedure downloads the application image (SmartWare) for the mainboard. See the note below 
on how to download the respective CLI description file.

Copies the SmartWare application image from the 
persistent memory (flash:) to the volatile memory 
(RAM) from where it will be executed.

Starts the SmartWare application telling it to use 
‘factory-config’ as startup configuration.
You can also start-up with any other configuration 
available in the persistent memory (nvram:) by pro-
viding its name instead of ‘factory-config’.

RedBoot> ip_address - l 
local_ip_address [/mask_len]

Sets the IP address and subnet mask of the 
Ethernet interface 0/0 which shall be used to 
receive the new application image.
mask_len is the length of the network address 
(or the number of  1’s within the subnet mask).
See Note below.