Jasco RM84911 Manual De Usuario

7

If your device does not respond after you have 
tried all the codes for your brand, or if your brand is 
not listed, try searching for your code by following 
these steps.

1.  Manually turn on the device (

TV, VCR, etc.) to 

be controlled.

2.  Press and hold the 

SETUP button 

until the red indicator stays on, then 
release the 

SETUP button.

3.  Press and quickly release the desired 

device button (

TV, VCR, etc.). The 

red indicator blinks off once.

4.  Press the 

 button 

repeatedly (up to 300 times) until 
the device to be controlled turns 
off. The red indicator blinks off with 
each button press.

Most users will store VCR codes under the 

button, Cable codes under 

CABLE, etc. If (for 

example) you want to store a VCR code under 

CABLE, fi rst follow the procedure for Direct Code 

Entry (previous page) and press 

CABLE in step 2 

of Direct Code Entry, then enter ANY VCR code in 
step 3 of Direct Code Entry. Then follow the steps 
above for Code Search.

Note:  Code Search starts from the currently 

stored three digit number under that mode. 
Sometimes the fi rst code that “works” with your 
device may only allow limited functionality (e.g. 
the MENU button might not work). There may be 
a code that performs more functions. Continue the 
code search process until the best code is found.

5.  Press and release 

ENTER to install the 

code.