Roland GR-33 Manual De Usuario

■

For more detailed information and instructions for this 
procedure, refer to “Selecting a Patch/Using the Guitar (GK-
2A) to Select Patches” (p. 21).

As you enter Pedal Effect mode, “PdL” (Pedal) will start 
to blink in the GR-33’s three-digit display.

fig.3-01

Press either [S1] or [S2] on the GK-2A to return to Play 
mode.

The same pedal can produce different effect amounts 
from patch to patch. These can be changed to suit a 
song—or for any other purpose—and can be saved as 
part of the patch.

For more information about each pedal effect function, 
and to learn how to change the effect amount, please see 
Chapter 5 (p. 35–52).

If you have set “S1/S2 FUNCTION” in System mode to 
“Patch Select” in order to use the buttons of the GK-2A for 
selecting patches, you can use pedal effects in Play mode. 
The four pedals will act as they do in Pedal Effect mode 
instead of selecting patches as they normally would in Play 
mode. (“PdL” will appear once every four seconds or so in 
the 3-digit display, indicating that pedal effects are 
available.)

For more detailed information and instructions about this 
type of setup, refer to “Selecting a Patch/Using the Guitar 
(GK-2A) to Select Patches” (p. 21).

* With the exception of the arpeggio latch hold (p. 76), pressing 

By using the four pedals on the GR-33, you can turn on 
and off the Arpeggiator (and Harmonist) function, and 
get effects such as synth sound hold and wah pedal.

This is called “

,” and along with the 

Play mode, is often used in performance.