Jasco RM24940 Manual De Usuario

24940 manual  8/19/03  9:04 AM  Page 5

The learning feature is used as a supplement to the stan­

dard preprogrammed library. the standar code library 

provides most of the functions needed,, but you can add 

additional functions from your original remote. Note: 

No functions may be stored under the LEARN, SLEEP, 

CODESEARCH, MENU or any of the device buttons. 

1. Place the remote control unit and the Original remote 

control unit so that they 

face each other. They 

should not be any more 

than 2 inches apart. 

2. Press and hold the 

button 

until the INDICATOR 

lights, then 

release the CODE SEARCH 

button. 

3. Press and release the desired 

Mode button (TV, VCR, 

, etc. . . .) The

will blink 

off once button press is accept­

ed. 

4. Press and release the LEARN 

button. 

5. Press and release the valid 

button to be learned on the 

94940 remote in which you will 

store a new function. The L1, L2, 

or any other button (except, 

LEARN, CODE SEARCH, MENU, 

OR device buttons) can be used to 

store learned functions. 

6. Press and hold the button on the 

original remote control until INDI­

on the 94940 

remote blinks once. Once the 

blinks you 

may continue with the next func­

tion. 

If there is error in learning the 

new function the INDICATOR 

will flash for 3 seconds but 

remain in the learning mode. 

Return to step 5 if the INDICA-

flashed. 

NOTE: Hold the function key on 

your original remote for at least 3 

seconds for the command to be successfully learned. 

7. Repeat steps 5 and 6 to store more functions. 

8. Once the selected functions are stored press the CODE 

SEARCH button and the remote will return to original 

operation mode.