Konica Minolta VI-910 Manual De Usuario
34
Chapter
2
File
Menu
Menu
9i
File – Import – Digitizer – One Scan (When VIVID 9i is Selected)
4
To display the object in the middle of
the Work window area, change the po-
sition of the object or move the instru-
ment back and forth to change the view
angle.
sition of the object or move the instru-
ment back and forth to change the view
angle.
3
Set an object in place.
If you are going to use the rotating stage,
place the object on it.
place the object on it.
M
emo
If necessary, replace the lens attached to the instrument.
If the lenses are changed, carry out field calibration using
the Field Calibration System.
If the lenses are changed, carry out field calibration using
the Field Calibration System.
5
Click the [Option] button.
The [File-Import-Digitizer-One Scan-Option]
dialog box will appear.
dialog box will appear.
6
Set optional parameters.
Item
Explanation
Scan Parameter
Sets the settings for scanning.
Convert Parameter
Sets the settings for three-
dimensionalization.
dimensionalization.
Stage Parameter
Select the rotary stage to be
used.
used.
[Default] button
Clicking this restores the
default settings.
default settings.
Ref. For details, refer to parameters (P.39) for [File-Im-
port-Digitizer-One Scan-Option] dialog box.
• Select the desired stage in [Stage Parameter] field,
and click on the [Apply] button. If the stage has
been recognized properly, a stage slide bar will be
displayed at the bottom of the work window when
the [File-Import-Digitizer-One Scan-Option]
dialog box is closed.
been recognized properly, a stage slide bar will be
displayed at the bottom of the work window when
the [File-Import-Digitizer-One Scan-Option]
dialog box is closed.
• If initialization is not successful, turn off the
power to the rotary stage power, turn it on again,
and then click on the [Apply] button.
and then click on the [Apply] button.
7
After necessary settings are made,
click the [OK] button.
The settings will be set and the [File-Import-
Digitizer-One Scan-Option] dialog box will
close.
Digitizer-One Scan-Option] dialog box will
close.