One For All OARN05G Manual De Usuario
2
Care and Maintenance
•
•
Keep the remote dry. If it gets wet, wipe it dry immediately.
•
Use and store the remote only in normal temperature
environments.
•
Handle the remote gently and carefully. Don’t drop it.
•
Keep the remote away from dust and dirt.
•
Wipe the remote with a damp cloth occasionally to keep it looking
new.
•
Modifying or tampering with the remote’s internal components
can cause malfunction and invalidate its warranty.
Battery Saver
Your universal remote control saves battery power by
automatically turning off if any key is pressed for more than
60 seconds. This saves your battery life should your remote
get stuck in a place where the keys remain depressed, such as
between sofa cushions.
automatically turning off if any key is pressed for more than
60 seconds. This saves your battery life should your remote
get stuck in a place where the keys remain depressed, such as
between sofa cushions.
Your universal remote requires three AAA alkaline batteries
(not included).
To install the batteries:
(not included).
To install the batteries:
1.
Remove the battery compartment cover.
2.
Insert the batteries, matching the (+) and (–) marks inside
the battery compartment.
3.
Push the battery cover back into place.
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
• Always remove old, weak or worn-out batteries promptly
and recycle or dispose of them in accordance with Local
and National Regulations.
To use this universal remote with your home entertainment
system, first you need to program it to control your devices.
There are four ways you can program the universal remote to
operate your devices:
system, first you need to program it to control your devices.
There are four ways you can program the universal remote to
operate your devices:
•
The Auto Code Search goes automatically through all the
codes for the device you’re trying to control. It’s the easiest
method, but it can sometimes take longer than some of the
other programming methods.
• The Brand Code Search searches through the codes for
select brands of devices. It’s not as easy as the auto code
search, but it can be faster.
• The Direct Code Entry lets you enter a code from the
accompanying code list for your brand of device. It’s not as
easy as the other methods, but it’s potentially the fastest
method. Note: Direct Code Entry is usually the best method
to use for audio devices.
• The Manual Code Search lets you manually go through all
the codes for the device you’re trying to control
.
Step 1: Install your batteries
Step 2: Program your remote