Sima Products SUR-47 Manual De Usuario
Setting Up
SUR-47 User’s Manual
24
Using the Transmission Feature
The SUR-47 can transmit data to another SUR-47 or to a PC with the optional USB-UART cable. You can
download firmware upgrades from the Internet or transfer configuration data.
Enter the setup menus, scroll to TRANS and press
download firmware upgrades from the Internet or transfer configuration data.
Enter the setup menus, scroll to TRANS and press
to enter the transmission menu.
Before you use this feature to transfer data with
your PC, you must connect the optional USB-UART
cable. Refer to Appendix B for more information.
your PC, you must connect the optional USB-UART
cable. Refer to Appendix B for more information.
1. Press or to select TRANS.
2. Press .
3. Press or to select one of the
2. Press .
3. Press or to select one of the
following options:
•
PRE-CODE – transmits
Preprogrammed Codes only
Preprogrammed Codes only
•
MEMORY –transmits All Flash
Memory Data
(Preprogrammed Code
included)
Memory Data
(Preprogrammed Code
included)
4. Press to begin transmission.
During the transmission, the LCD
displays blank keys as shown in
displays blank keys as shown in
the illustration.
When the transmission is
When the transmission is
completed, OK is displayed on
the LCD. If there is an error in
transmitting the data, ERROR is
transmitting the data, ERROR is
displayed.
Miscellaneous Menus
Enter the setup menus, scroll to Other and press
to enter this menu. Press
and
to scroll through the
menu options:
•
Clock
enables you to set the date and time
•
Power
enables you set the time that will elapse before the SUR-47 turns off
•
Backlight
lets you set the time that the backlight remains on
•
Beep
turns the key and button beep signal on and off
•
Version
displays the SUR-47 firmware version