ICOM iC-706MKTMG Manual De Usuario
CONNECTING THE PS-85 DC POWER SUPPLY
PS-85
Connect to an AC outlet
using the supplied AC cable.
using the supplied AC cable.
DC power cable
DC power
socket
socket
CONNECTING A NON-ICOM
DC POWER SUPPLY (For Europe versions)
DC POWER SUPPLY (For Europe versions)
Transceiver
DC power
socket
To non-Icom
power supply
power supply
[GND]
OPC-639
CONNECTING A NON-ICOM
DC POWER SUPPLY
DC POWER SUPPLY
Transceiver
DC power
socket
socket
To AC outlet
Supplied
DC power cable
DC power cable
13.8 V
Black
30 A fuses
Red
20 A
13
2
INSTALLATION AND CONNECTIONS
■
Power supply connections
Use the optional PS-85
DC POWER SUPPLY
when oper-
ating the IC-706MKIIG with AC power. Refer to the
diagram below for connection.
diagram below for connection.
CAUTION:
Before connecting the DC power
cable, check the following important items. Make
sure:
• The [POWER] switch is OFF.
• Output voltage of the power source is 12–15 V
sure:
• The [POWER] switch is OFF.
• Output voltage of the power source is 12–15 V
when you use a non-Icom power supply.
• DC power cable polarity is correct.
Red
:
positive (+) terminal
Black :
negative (–) terminal
Grommet
CONNECTING A VEHICLE BATTERY
NEVER
connect to
a 24 V battery.
Note:
Use terminals for
the cable connections.
Crimp
Solder
Supplied
DC power cable
DC power cable
red
black
12 V
battery
battery
Note: When using the PS-85, the IC-
706MKIIG Europe version complies with
EMC directives even if the OPC-639 is
not used.
706MKIIG Europe version complies with
EMC directives even if the OPC-639 is
not used.