Sony DHG-M55CV Manual De Usuario

The keyboard is preset at the factory to operate any Sony brand TV. If 
you have any other brand of TV, use the following procedures to 
program the keyboard to use any of the highlighted buttons shown 
on page 8.

Set the keyboard’s 

TV/CABLE

 switch to 

TV.

Turn to “Wireless Keyboard Programmable Codes” on page 13, 
and find the 3-digit code for your TV. If more than one code is 
listed, use the number listed first to complete the following 
procedures.

Press the 

CODE SET

 button.

Enter the 3-digit code for your TV using the 0-9 keys.

Press the 

OK/Enter

 key.

Aim the keyboard at the TV and press 

TV POWER

.

If the TV responds, try the 

VOLUME

 and 

MUTE

 buttons. If the TV 

responds, you’re done.

If the TV does NOT respond
❑

Try programming the keyboard using the other codes listed for 
your TV brand. 

❑

If you still cannot get your TV to respond after trying all the 
codes, your TV may not be compatible with this keyboard. If this 
happens, you must use your TV’s remote to operate it.

The keyboard functions like a remote control. To use it, just point it at 
the front panel of the Digital Network Receiver. For best results, the 
keyboard should be used within 30 feet of the Digital Network 
Receiver, at no more than a 45° angle.

To raise the legs on the keyboard, use your finger to pry up the 
adjustable legs on the bottom of the keyboard until you feel them lock 
into place. To lower the keyboard, push each leg down until it snaps 
into the closed position.

CV.book  Page 10  Thursday, November 30, 2000  2:13 PM