Samsung DVD-V85 Manual De Usuario
Searching for a Specific Sequence
42
43
GB
GB
Searching for a Specific Sequence
Intro Scan
1
After pressing the SEARCH, press the corresponding
or
❷
buttons, until the
Intro Scan
option is selected.
2
Press the OK or
❿
.
3
Press the
➛➛
or
❿❿
buttons depending on the direction
where your desired programme is located.
4
When an Index mark is found the DVD-VCR will playback the tape
for 5 seconds, after which it will continue searching for the next
Index mark.
for 5 seconds, after which it will continue searching for the next
Index mark.
5
If you want to watch the tape from a particular Index, simply press
❿
II
.
I
ndex Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the SEARCH button.
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the SEARCH button.
1
After pressing the SEARCH, press the corresponding
or
❷
buttons, until the
Intro Scan
option is selected.
2
Press the OK or
❿
.
3
Press the
➛➛
or
❿❿
buttons twice more. This will take
you directly to the start of the desired programme is located.
4
These Index searches can be made forwards: (press
❿❿
) or
backwards: (press
➛➛
). (
➛➛
-20
●
●
0
●
●
+20
❿❿✌
5
To cancel an Index search simply press the
❿
II
or
■
button.
INTRO SCAN:
➛➛ ❿❿
INDEX SEARCH :
➛➛
- 6
2
2
VCR
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
➢
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
Go To 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
or
❷
buttons, until the
Go To (0:00:00)
option is selected.
2
Press the OK or
❿
.
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1
After pressing the SEARCH, press the corresponding
or
❷
buttons, until the
End Search
option is selected.
2
Press the OK or
❿
.
2
1
1
2
➞
etc.
Prev
Seq.
Seq. being
played
Next
Seq.
etc.
OK
VCR
1