Samsung DVD-V85 Manual De Usuario

With the unit in Stop mode, press the MENU button.

Select DVD using 

,

❷

buttons, then  OK or 

❿

button.

Select Parental Setup using 

,

❷

buttons, then press the OK or

❿

button.

Use OK or 

❿

to select Yes if you want to use a password. 

The Enter Password screen appears.

Enter your password. The Re-Enter Password
screen appears to confirm the password. 
Ok your password again. The Parental Control screen appears.

•  About the Rating Level ;

The Rating Level will work only when Use Password is set to 
Yes. To unlock the player, use 

,

❷

to select No. Use 

❿

or OK 

to select Rating Level. Press OK.
- Use 

,

❷

to select the level(e.g. Level 6) and press OK. Discs

that contain Level 7 will now not play.

- To cancel the rating level, use 

❿

or OK to select No in Use

Password.

•  About the Change Password ;

- Use 

,

❷

to select Change Password. 

Press OK. The Change Password screen appears.

- OK your new password. Re-ok the new password again.

➢ 

screen during set up; Press RETURN or ➛ button.

With the unit in Stop mode, press the MENU button.

Select DVD using 

,

❷

buttons, then OK or 

❿

button.

Select Display Setup using 

,

❷

buttons, then press the OK or 

❿

button.

Use the 

,

❷

buttons to select the desired item. Then press the

OK or 

❿

button.

Depending on the type of television you have, you may want to adjust 
the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, 
even though you have a TV with a 4:3 ratio screen. Black bars will 
appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the central 
portion of the 16:9 screen. (Extreme left and right side of movie picture 
will be cut off.)
3. 16:9 Wide : 
You can view the full 16:9 picture on your widescreen TV.

Adjusts the brightness of the screen.(On/Off)

“NTSC” if the screen only has one NTSC-video entrance. If this is not 
the case, you can choose to leave “ PAL 60Hz” as is.

Component :  Sends COMPONENT signal (Y, Pb, Pr) to the

component video out JACK. 

S-Video :  Sends S-VIDEO signal to the S-VIDEO OUT JACK.

Video :  Sends COMPOSITE VIDEO signal to the Scart JACK.