Samsung DVD-V85 Manual De Usuario
12
13
GB
GB
Connecting DVD-VCR to the TV using the Coaxial Cable
Connecting DVD-VCR to the TV using the RCA Cable
To receive television programmes a signal must be received from
one of the following sources:
one of the following sources:
◆ An outdoor aerial
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
◆ An indoor aerial
◆ A cable television network
◆ A satellite receiver
☛
Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75
Ω
coaxial socket marked
on the
rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the
socket on your
DVD-VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
TV
3
2
ou can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on
the television. You thus:
the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
◆ Simplify the setting up procedure of your DVD-VCR
☛
◆
Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆
Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of
the DVD-VCR.
the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
TV
4
Deciding How to Connect DVD-VCR
You must take into account various factors when connecting audio or video systems:
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector
Location
Type
Direction
Recommended Use
LINE 1
Rear
Audio/Video RCA
In/Out
◆
Television
◆
Other VCR
Audio output
Rear
Audio RCA
Out
◆
Audio out (DVD only)
LINE 2
Front
LINE 2
In
◆
Audio in
Audio/Video
Video in
COMPONENT Rear
RCA
Out
◆
COMPONENT out (DVD only)
output
S-VIDEO Rear
S-JACK
Out
◆
S-Video out (DVD only)
output
Digital AUDIO Rear
Optical
★
(DVD-V80/ DVD-V85)
Out
◆
Digital Audio out (DVD only)
output
coaxial
OUT TO TV
Rear
75
Ω
Out
◆
Television
coaxial
IN FROM ANT. Rear
75
Ω
In
◆
Aerial
coaxial
◆
Cable television network
◆
Satellite receiver
☛
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
Aerial
RF coaxial cable
2
3
TV