Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Panasonic
  4. AG-3200P
  5. Manual De Usuario

Panasonic AG-3200P Manual De Usuario

Descargar
Página de 24
— 10 —
Page 10
May 28, 2002 2:53 pm
Automatic operations after rewinding
— Next Function Memory
The Next Function Memory “tells” the VCR what to do after 
rewinding is complete. Ensure that the VCR is in stop mode.
● For Automatic Playback Start
Press REW (
3
), then press PLAY (
4
) within 2 seconds.
● For Automatic Power Off
Press REW (
3
), then press POWER 1 within 2 seconds.
● For Automatic Timer Standby
Press REW (
3
), then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function if 
the cassette’s record safety tab is removed.
Playing back tape repeatedly (100 times)
— Repeat Play
During playback, press and hold PLAY (
4
) for more than 
5 seconds. The play indicator (
$
) on the display panel starts 
blinking slowly. To stop playback, press STOP (
8
) on the Remote 
or STOP/EJECT (
0
) on the VCR.
Locating beginning of recordings
— Index Search
Index codes are placed on the tape at the beginning of each 
recording when recording on this VCR.
A
While the tape is not running, press SHUTTLE PLUS 
2
 or 
6
 
on the Remote to start search.
B
To access a recording of 2 to 9 index 
codes away, press 
2
 or 
6
 
repeatedly until the correct number is 
displayed on the screen (only if 
“SUPERIMPOSE” is set to “ON” 
(
墌
pg. 15)). Playback begins 
automatically when the desired 
recording is located.
Locating beginning of timer recordings
— Instant Review
After ensuring that the VCR is turned off and that the timer mode is 
disengaged, press REVIEW.
● The VCR turns on, and rewinds to the index code indicating the 
beginning of the last timer-recorded program, then begins 
playback automatically.
● You can access a program of 2 to 9 index codes away from the 
current position on the tape. If, for example, you have 
5 programs recorded and you want to watch the third one, press 
REVIEW three times.
● The Instant Review function will also operate if the VCR is 
turned on.
Skipping unwanted portions
— Skip Search
Press SKIP SEARCH on the Remote once to 4 times during 
playback. Each press initiates a 30-second period of high speed 
playback (up to 2 minutes). When the specified portion of the tape 
is skipped, normal playback resumes automatically. To return to 
normal playback during Skip Search, press PLAY (
4
).
2nd next
Beginning of the
current program
recorded
Current 
position on 
the tape
Beginning of the 
2nd next program 
recorded
Previous 
program 
recorded
Next 
program 
recorded
AG-3200P-EN-1.fm  Page 10  Tuesday, May 28, 2002  2:54 PM