Genesis Advanced Technologies G2.2 Manual De Usuario
5
55
5
a bs o l u t e f i d e l i t y
retract the spikes first. This will avoid causing damage to the
acoustic suspension and to your floor.
acoustic suspension and to your floor.
5)
If you have very light and resonant floorboards, you may
need to place a heavy slab of marble, slate, or granite under
the loudspeaker to avoid exciting the floor.
need to place a heavy slab of marble, slate, or granite under
the loudspeaker to avoid exciting the floor.
The Servo-Controlled Bass Amplifier
The included remote-controlled
modular Servo-Controlled Bass
Amplifier powers the woofer towers
of the G2. There are three modules
plus a power supply unit and
numerous supplied cables in the
standard configuration. Various
upgrades are also available for the
Servo-Controlled Bass Amplifier –
please check with your dealer.
modular Servo-Controlled Bass
Amplifier powers the woofer towers
of the G2. There are three modules
plus a power supply unit and
numerous supplied cables in the
standard configuration. Various
upgrades are also available for the
Servo-Controlled Bass Amplifier –
please check with your dealer.
The parts of the amplifier are:
1)
The electronic crossover and Control Module with left
and right balanced inputs and two control outputs.
and right balanced inputs and two control outputs.
2)
A pair of Control Interface Cables (CIC): these have
7-pin Neutrik™ connectors at each end.
7-pin Neutrik™ connectors at each end.
3)
A pair of Servo-Bass Interconnects (SBI) with XLR
connectors at one end and a pair of banana plugs (or
optionally spades) at the other end.
connectors at one end and a pair of banana plugs (or
optionally spades) at the other end.
4)
Two Servo-feedback Amplifier Modules with one
control input, and two Neutrik 50-amp Speakon™
outputs.
control input, and two Neutrik 50-amp Speakon™
outputs.
5)
Two pairs of Servo-Bass Cables (SBC) with Neutrik
50-amp Speakon™ plugs at each end.
50-amp Speakon™ plugs at each end.
6)
A Power Supply for the Amplifier Modules with two
Neutrik™ 20-amp PowerCon™ outlets.
Neutrik™ 20-amp PowerCon™ outlets.
7)
A pair of Power Umbilicals with a Neutrik 20-amp
Powercon plug at each end (one grey and one blue).
Powercon plug at each end (one grey and one blue).
In the typical configuration, the Control Module, and two Servo-
feedback Amplifiers are placed in a stack between the
midrange/tweeter wings. The Power Supply is placed behind the
stack. The standard cables supplied will work for this configuration:
9-foot (3m) Servo-Bass Cables (SBC), two-foot (0.6m) Control
feedback Amplifiers are placed in a stack between the
midrange/tweeter wings. The Power Supply is placed behind the
stack. The standard cables supplied will work for this configuration:
9-foot (3m) Servo-Bass Cables (SBC), two-foot (0.6m) Control
Genesis 2 Servo-Controlled Bass Amplifier
(with optional amplifier suspension for floor placement)