Radio Shack 66 Manual De Usuario
20
When the information is correct and the
time reaches the minute you set in Step 6,
press
time reaches the minute you set in Step 6,
press
MENU/ACTION
twice. The time you
set appears and the clock starts running.
Note: Seconds begin counting from 00
when you press
when you press
MENU/ACTION
the second
time.
Adding/Erasing Channels
If you followed the steps listed in “Alternate
Setup” on Page 18, we recommend you check
the channels the VCR automatically stored. It
might have stored distant, weak channels that
you normally would not watch, or it might have
missed channels you want to store.
Setup” on Page 18, we recommend you check
the channels the VCR automatically stored. It
might have stored distant, weak channels that
you normally would not watch, or it might have
missed channels you want to store.
If the tuner stores a channel that you do not
want, repeatedly press (or hold down)
want, repeatedly press (or hold down)
CH
s or t
or use the remote control’s number buttons to
tune to that channel, then press
tune to that channel, then press
ADD/DLT
.
CHANNEL
nn
DELETED
appears, and the un-
wanted channel is erased from the tuner’s
memory.
memory.
To add a channel, enter the desired channel
number using the remote control’s number but-
tons. Then press
number using the remote control’s number but-
tons. Then press
ADD/DLT
.
CHANNEL
nn
ADDED
appears, and the channel is added to
memory.
Reprogramming Tuner Memory
If you followed the steps listed in “Alternate
Setup” on Page 18, you might want to repro-
gram the VCR’s tuner memory if you later
move or change from an antenna connection to
a cable TV connection.
Setup” on Page 18, you might want to repro-
gram the VCR’s tuner memory if you later
move or change from an antenna connection to
a cable TV connection.
Note: You can also quickly erase all settings, in-
cluding the time, local channels, and pro-
grammed events, then reprogram the tuner’s
memory. See “Resetting the VCR’s Memory” on
Page 25.
cluding the time, local channels, and pro-
grammed events, then reprogram the tuner’s
memory. See “Resetting the VCR’s Memory” on
Page 25.
Follow these steps to reprogram the tuner.
1. Press
MENU/ACTION
to display the main
menu.
Note: To exit the programming mode dur-
ing Steps 2–5, press
ing Steps 2–5, press
MENU/ACTION
twice.
2. Repeatedly press
or
to highlight
SET
UP
CHANNEL
, then press
.
3. If necessary, repeatedly press
or
to
highlight
ANTENNA
.
4. Press
again to select the antenna
source (
TV
or
CABLE)
.
5. Press
or
to highlight
AUTO SET
, then
press
. You see:
6. Set your cable box to the local PBS station,
then press
CH s
. (If you do not have a
cable box, simply press
CH s
.)
After you press
CHs
,
CH
AUTO
SET
PRO-
CEEDING
and the current channel number
appear on the TV screen as the VCR scans
through the channels and memorizes all
active channels in your area.
through the channels and memorizes all
active channels in your area.
RE
NEL
UE : ENGL I SH
Y
KEY
- - - - - - - - -
N
SET UP
SET UP
T UP
Y
KEY
ANNEL
- - - -
AUTO SET
A CABLE
THEN. . .
A CABLE
YOUR
YOUR
H UP KEY
16-635.fm Page 20 Wednesday, July 21, 1999 9:03 AM